Federal contracting guide, active SAM.gov solicitations, small business size standards, and top purchasing agencies for NAICS code 238910.
Solicitation 140FS226Q0181 for F--MN- TAMARAC NWR - HAZARDOUS FUEL REDUCTION - BRUSH AND TREE REMOVAL published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0072 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0066 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0064 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0056 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0054 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0068 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0063 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0062 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0061 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140L1726Q0018 for Y--RPFO-NCA VAULT TOILET AND REMOVAL published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0059 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0058 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0055 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0053 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0052 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0051 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0050 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0049 for F--National Fuels Reduction BPA published by INTERIOR, DEPARTMENT OF THE. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.
Solicitation 140F0S26A0069 for F--National Fuels Reduction BPA published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.
Solicitation 140F0S26A0067 for F--National Fuels Reduction BPA published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.
Solicitation 140F0S26A0065 for F--National Fuels Reduction BPA published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.
Solicitation 12RADA26P0005 for Demolition of Grape Genetic Research Unit Administraton Building published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.
Contractor shall furnish all equipment, including equipment operators, necessary to perform services on the Raystown Lake Project in Huntingdon County, Pennsylvania. Work may occur in various locations of the Project, including Nancys Campground, Aitch Recreation Area, Seven Points Recreation Area, Susquehannock Campground, and other recreation areas within the Raystown Lake Project. Work will be focused on placing shoreline protective block walls, improving recreation walkways, repairing recreational campsites, removing or relocating earth material, and improving parking areas other recreational sites.
CA-FWS HUMBOLDT BAY NWR-ROAD MATERIAL
The federal government has issued this official active requirement (W9123826PA043) on SAM.gov. Complete technical specifications, statements of work, evaluation criteria, and attachments are accessible directly on the authoritative federal record.
WV CANAAN VLY NWR BONNER HS DEMO
Description The United Stated Embassy in Kingston, Jamaica, plans to issue a Request for Quotations (RFQ) for trenching, conduit and ground-well installation in various locations on the Embassy compound. Scope of Work: The contractor will provide all labor, equipment, supervision, material specific to the back filling and compaction and management needed to complete the job Infrastructure Support System - Handhole / Underground Conduit System Trenching • Nine locations have been identified requiring trench work. • Thirteen locations have been identified requiring trench work. • Before excavation, the Contractor shall locate and verify all existing utilities in the proposed trench alignment. • If excavation interferes with existing drains, piping, or structures, the Contractor shall immediately notify, in writing, the COR and provide temporary protection for these systems before proceeding. Trenching from Handholes • The Contractor shall make wall penetrations into existing manholes/handholes as required for the number and size of conduits entering and exiting each structure, in accordance with the drawings. Conduit • Existing conduit shall remain in place unless the drawings specifically direct removal or modification. • Under grass, soil, the Contractor shall install Schedule 80 PVC conduit with a minimum cover of 24 inches (610 mm) from finished grade to top of conduit, or as indicated on the drawings, whichever is greater. • All underground 90 degree bends with a 12inch (305 mm) radius shall use prefabricated sweeping bends. • Above grade, all underground PVC conduit shall transition to rigid galvanized steel (RGS) using PVC to RGS couplers. • The Contractor shall install pull lines in all new conduit runs. Soil and Backfill Materials Soil Materials The Contractor shall provide all labor and materials for soil and backfill, where required. • Select Backfill: ASTM D 2487 soil classification groups SW, SP, and SM, or combinations thereof; free of rock or gravel larger than 3 inches (75 mm), debris, waste, frozen materials, vegetation, and other deleterious matter. • Asphalt/Concrete Base Course: Naturally or artificially graded mixture of natural or crushed gravel, crushed stone, and natural or crushed sand; ASTM D 2940; with at least 95% passing a 11/2inch (40 mm) sieve and not more than 8% passing a 1/4inch (6.4 mm) sieve. • Base Gravel: Naturally or artificially graded mixture of natural or crushed gravel, crushed stone, and natural or crushed sand; ASTM D 2940; 100% passing a 1inch (25 mm) sieve and not more than 8% passing a 1/4inch (6.4 mm) sieve. • Sand Cushion: ASTM C 33 fine aggregate, natural or manufactured sand. Placement and Compaction • Place backfill and fill in layers not exceeding: • 8 inches (203 mm) loose thickness for heavy compaction equipment; • 4 inches (102 mm) loose thickness when compacted by hand-operated tampers. • Place backfill and fill evenly to the required elevations, uniformly along their full length. • Compact soil materials to not less than the following percentages of maximum dry unit weight per ASTM D 1557: • Under lawns or unpaved areas: scarify and re-compact top 6 inches (152 mm) below subgrade and compact each layer to 85%. • Utility trenches: compact each layer of initial and final backfill to 85%. Anticipated Period of Performance: a base period of twenty-one (21) days after contract award Eligibility and Registration Offerors must hold an active registration in the System for Award Management (SAM.gov) when they submit a proposal and at award. Local Insurance and Defense Based Act (DBA) Insurance. Solicitation Availability The Embassy will post the solicitation and all amendments only on SAM.gov at https://sam.gov. Interested parties should monitor SAM.gov for the release and any amendments. The Embassy will not issue paper copies. Disclaimer This notice is for informational purposes only and is not a request for proposals. It does not commit the Government to issue a solicitation or award a contract. The Government will not pay for any information or materials submitted in response to this notice. Interested Parties are required to send their interest to [email protected] on or before October 26, 2026 at 2pm local time.
Federal buyers evaluate offerors under NAICS 238910 through a combination of verified technical capability, past performance relevance, and price reasonableness. Follow this proven pursuit framework:
Check the solicitation Section L & M instructions and ensure SAM.gov registration is active.
NAICS code 238910 is a standard North American Industry Classification System code used by federal contracting officers to categorize solicitations and establish small business size standards.
To bid on NAICS 238910 opportunities, ensure your entity is registered on SAM.gov with NAICS 238910 listed in your assertions, and submit a compliant offer in response to the active solicitation.