NAICS Classification 333912 Government Contracts

Solicitation 70Z04026Q62113Y00 for Bauer TYPE II-C-D/DV/MU/DIVE Breathing Air Compressor published by HOMELAND SECURITY, DEPARTMENT OF. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.

RevolveAir breathing-air system capable of filling cylinders at pressures up to 6,000 PSI. The requirement includes a standard-base RevolveAir Fill Station with a stationary fill panel, four-bank automatic cascade system, four 20-foot fill hoses, CGA adapter, wall rack for four to six cylinders, UN 6,000 PSI cylinders with CGA 702-25SE valves, custom collar rings with fitting kits, and quick-connect adapters compatible with MSA G1 4,500/5,500 PSI cylinders and MSA/Dräger couplings. The system must include a four-stage, 10 HP PivotAir compressor rated for 6,000 PSI/414 BAR and configured for 208–230V, single-phase, 60 Hz power, along with a CO monitor, calibration kit, and 25-foot supply hose.

The contractor is required to supply, install, and program a new, fully compliant AIR Pack Compressor Fill Station at Building 1093 on Sheppard Air Force Base. This scope of work includes providing all necessary labor, tools, and materials to safely decommission and remove the existing unit, as well as providing comprehensive system training to local personnel. All installation, coordination, and testing must be completed to deliver a fully operational system within 360 calendar days of the contract award.

Solicitation W912EK26PA094AIRCOMPRESSOR for 1600 CFM Diesel Rotary Screw Compressor published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE7M126T282U for 43--ACTUATOR,DIAPHRAGM published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE7M126T338H for 43--LINER published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE7M426T138G for 43--YOKE,SUCTION VALVE published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE7M126T259W for 43--HOOD ASSEMBLY FIBER published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE7M126T317B for 43--REPAIR KIT,COMPRESSOR published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Indefinite Delivery Contract: Estimated quantity 113.000 ; Not to Exceed 350,000.00

Proposed procurement for NSN 4310012887416 CYLINDER HEAD,COMPRESS: Line 0001 Qty 2 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0158 DAYS ADO Approved sources are 0AT62 33240334; 0AT62 F24949P1; 8FGX3 F24949P1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Please see attached USNS COMFORT (T-AH 20) High Pressure Reciprocating Air Compressor solicitation and redacted Other than Full and Open Memo.

Proposed procurement for NSN 4310015066413 AIR END ASSEMBLY: Line 0001 Qty 2 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0157 DAYS ADO Approved source is 28953 84-35024. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310014631152 FILTER ASSEMBLY,FLUID: Line 0001 Qty 44 UI AY Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0157 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310010318351 RING,PISTON: Line 0001 Qty 9170 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0157 DAYS ADO This is a source controlled drawing item. Approved source is 74069 2505431. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Amendment 01 (08 Oct): The due date for quotes has been extended to October 16, 2026. Bauer Rebuild Kit in accordance with the Equipment List. Important Note: All amendments must be acknowledged via signature in order for the quote to be complete.

1. DISCLAIMER & SPECIAL NOTICES This Request for Information (RFI) is issued solely for market research, planning, and information purposes in accordance with Federal Acquisition Regulation (FAR) 10.002, FAR Part 12 (as updated under the Revolutionary FAR Overhaul [RFO] model class deviation and E.O. 14275), FAR 15.201(e), and FAR 52.215-3 (Request for Information or Solicitation for Planning Purposes). No Solicitation Exists: This notice does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), a Request for Quotations (RFQ), or a promise to issue any solicitation in the future. No Commitment: Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The issuance of this RFI does not commit the U.S. Government to contract for any product or service whatsoever, nor does it guarantee that a formal procurement will result. Commerciality & RFO Part 12 Application: Market research obtained via this notice will assist the Contracting Officer in determining whether commercial procedures under rewritten FAR Part 12 apply and whether contemplated items meet the statutory definition of a "Commercial Product" or "Commercial Product with Modifications" pursuant to 10 U.S.C. §§ 3451–3453 and FAR 2.101. No Reimbursement: The Government will not pay for any information, administrative costs, travel, or submissions incurred in responding to this RFI. All submitted materials shall become Government property and will not be returned. Responders are advised that the U.S. Government will not be held liable for any use or disclosure of data provided in response to this notice unless clearly marked with proprietary rights legends. 2. PURPOSE & OBJECTIVES Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF), under contracting activity N4523A, is conducting market research to: Assess Commercial & Modified COTS Availability: Determine whether commercial products currently available in the commercial marketplace—or commercial products that can be modified of a type customarily available in the commercial marketplace to meet the Government's requirement—satisfy PSNS & IMF's operational parameters pursuant to RFO FAR Part 12. Evaluate Customary Commercial Practices & Customary Modifications: In accordance with RFO FAR Subpart 12.1 (Pre-solicitation), identify commercial practices regarding warranties, maintenance intervals, testing, and delivery terms, and understand the degree of adaptation required to configure commercial industrial nitrogen plants into shipyard-ready, containerized units. Obtain Specification Feedback: Solicit industry input, risk assessments, and recommendations regarding the Government's draft performance requirements to eliminate overly restrictive or non-commercial specifications. Refine Acquisition Strategy: Gauge market maturity, delivery lead times, First Article Test (FAT) feasibility, and cost drivers to structure an optimal commercial IDIQ solicitation under streamlined RFO FAR Part 12 procedures. 3. CONTEMPLATED CONTRACT STRUCTURE & SCOPE The Government is contemplating an Indefinite Delivery / Indefinite Quantity (IDIQ) contract structure utilizing FAR Part 12 (Acquisition of Commercial Products and Commercial Services) streamlined procedures in conjunction with FAR Part 15 (Contracting by Negotiation): Item Categorization: Modified Commercial Product. The baseline generation system must rely on active production commercial products and components with active commercial part-numbers; prototype or unproven "pre-production" components are not authorized. First Article Test (FAT) Unit: Two (2) initial units subject to qualification, Nationally Recognized Testing Laboratory (NRTL) inspection, independent accredited laboratory gas purity verification, and operational verification testing. Production Units: Up to ten (10) production units to be ordered via firm-fixed-price delivery orders across the ordering period based on shipyard operational requirements and subject to availability of funds. Support Services & Spares: Delivery, initial on-site commissioning, operational verification, 24 months of spare consumable parts, standard commercial documentation and manuals, and optional multi-year maintenance service agreements. Contemplated Source Selection Method: Best Value with Tradeoffs in accordance with RFO FAR 12.203 and FAR Part 15, where technical capability, system reliability, delivery schedule, and past performance will be evaluated in relation to total evaluated price. Lowest Price Technically Acceptable in accordance with FAR Part 15, where the lowest price meeting or exceeding the acceptability standards for non-cost factors. 4. SUMMARY OF DRAFT TECHNICAL REQUIREMENTS The contemplated system is a ruggedized, portable, special-purpose gaseous nitrogen generation plant packaged for demanding maritime shipyard environments. See attached Draft Statement of Work. 5. REQUESTED INDUSTRY FEEDBACK (RFO FAR PART 12 MARKET RESEARCH) In alignment with RFO FAR Part 12 pre-solicitation policy to minimize barriers to commercial item procurement and identify standard commercial terms, industry partners are requested to provide feedback on the following: Topic A: Commercial Product Availability & Customary Commercial Practice • Does your firm currently manufacture, sell, or lease standard commercial nitrogen generation systems that achieve the requested purity? • Does your product qualify as a "Commercial Product" or a "Commercial Product with Modifications" under FAR 2.101? • What specific modifications would be required to adapt your standard commercial offering to meet the PSNS specifications (e.g., ISO container integration, shipyard color restrictions, specific alarm announcements, acoustic attenuation)? Are these modifications of a type customarily available in the commercial marketplace? • What are standard commercial warranty terms, customary commercial maintenance agreements, and commercial service intervals for equipment of this type? • Under RFO FAR Part 12, what standard commercial terms and conditions or financing practices should the Government consider incorporating or tailoring? Topic B: Technical Feasibility, Packaging, & Trade-offs • Is packaging the complete system within a single ISO container achievable using mature, non-developmental COTS components? • If bottle banks or compressors require external placement or a two-container configuration, what are the primary engineering trade-offs (e.g., thermal management, footprint, mobilization time)? • What technology type (e.g., multi-stage Pressure Swing Adsorption [PSA], catalytic deoxo purification, hybrid membrane/cryogenic) do you recommend to reliably achieve under fluctuating shipyard demand cycles? Topic C: Operational Profile & Maintenance Cycles • Is the requirement for 180 days of continuous operation without scheduled filter/oil/adsorbent servicing commercially standard or viable? If not, what is your standard commercial maintenance schedule? • Does the requirement for 7-day autonomous operation present any unforeseen failure modes or safety hazards in an unmanned industrial outdoor yard setting? Topic D: Acquisition Strategy, Lead Times, & Evaluation Factors • What is the realistic manufacturing, modification, and FAT lead time for an initial First Article unit following contract award? • What lead time is expected for follow-on production delivery orders (e.g., 1–3 units per order)? • What are the primary cost and schedule drivers in the draft requirements (e.g., purity verification, acoustic attenuations, marine coating, 180-day continuous run requirement)? • Under the contemplated FAR Part 12 / Part 15 Best Value Tradeoff framework, what commercial evaluation factors (e.g., past performance, demonstrated commercial reliability, warranty terms, life-cycle costs) would best enable offerors to propose innovative commercial solutions? 6. CAPABILITY STATEMENT SUBMISSION FORMAT & CONTENT Interested parties capable of providing these systems are requested to submit a Capability Statement addressing the following structure: Section 1: Administrative & Company Information Company Name, Address, Website, and Commercial and Government Entity (CAGE) Code. Unique Entity Identifier (UEI) under SAM.gov. Designated Point of Contact (Name, Title, Phone, Email). Business Size Status under primary NAICS Code (e.g., 333912 - Air and Gas Compressor Manufacturing, 336611, or other applicable codes): Large Business, Small Business, SDB, WOSB, VOSB, SDVOSB, HUBZone, or 8(a). Geographic location of manufacturing, integration, and service facilities. Section 2: Commercial Capabilities & Relevant Experience Detailed summary of standard commercial or modified COTS systems manufactured by your firm that demonstrate equivalent purity, flow rate, and delivery pressure. Provide commercial product cut sheets, brochures, or model numbers. Specific description of necessary modifications to adapt your commercial model to the PSNS environmental, enclosure, and safety constraints. Overview of system architecture, packaging concept (ISO enclosure vs. dual container), and control philosophy. Overview of field maintenance infrastructure capable of providing 3-year support, warranty service, and on-site commissioning at naval facilities in the Pacific Northwest. Provide up to three (3) examples of relevant commercial or government sales within the last five (5) years involving similar high-purity industrial or military gas generation systems. Include customer points of contact and contract/order values. Section 3: Specification Feedback & Rough Order of Magnitude (ROM) Specific comments, suggested modifications, or clarifications on the technical requirements summarized in Section 4 and Topic questions in Section 5. Non-binding Rough Order of Magnitude (ROM) unit pricing estimates for: First Article Test (FAT) Unit (per-unit cost for 2 units, including qualification, modifications, and initial testing). Production Units (per-unit cost for up to 10 units across an IDIQ lifecycle). 24-Month consumable spare parts package. Standard commercial warranty terms and optional 5-Year comprehensive maintenance contract. 7. SUBMISSION INSTRUCTIONS & CONTACT INFORMATION * **Response Deadline:** Responses are requested by: 16 October 2026 , no later than 16:00 Pacific Time. * **Submission Medium:** Electronic submissions only in Adobe PDF or Microsoft Word format. Page count should not exceed fifteen (15) pages (excluding standard product specification sheets or brochures). * **Proprietary Data:** If your response contains proprietary or business-sensitive information, each page containing such data must be clearly labeled and marked accordingly. * **Submittal Point of Contact:** All responses, questions, and inquiries regarding this notice must be submitted via email to: Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) Attn: Contracting Department (Code 400 / N4523A) Contracting Officer: George Ball - [email protected] Contracting Officer: James Kibbee - [email protected] Contract Specialist: Lennie Daye - [email protected] Subject Line: *Response to RFI - PSNS Portable High-Purity N2 Generator (N4523A27RFI0801)

1. DISCLAIMER & SPECIAL NOTICES This Request for Information (RFI) is issued solely for market research, planning, and information purposes in accordance with Federal Acquisition Regulation (FAR) 10.002, FAR Part 12 (as updated under the Revolutionary FAR Overhaul [RFO] model class deviation and E.O. 14275), FAR 15.201(e), and FAR 52.215-3 (Request for Information or Solicitation for Planning Purposes). No Solicitation Exists: This notice does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), a Request for Quotations (RFQ), or a promise to issue any solicitation in the future. No Commitment: Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The issuance of this RFI does not commit the U.S. Government to contract for any product or service whatsoever, nor does it guarantee that a formal procurement will result. Commerciality & RFO Part 12 Application: Market research obtained via this notice will assist the Contracting Officer in determining whether commercial procedures under rewritten FAR Part 12 apply and whether contemplated items meet the statutory definition of a "Commercial Product" or "Commercial Product with Modifications" pursuant to 10 U.S.C. §§ 3451–3453 and FAR 2.101. No Reimbursement: The Government will not pay for any information, administrative costs, travel, or submissions incurred in responding to this RFI. All submitted materials shall become Government property and will not be returned. Responders are advised that the U.S. Government will not be held liable for any use or disclosure of data provided in response to this notice unless clearly marked with proprietary rights legends. 2. PURPOSE & OBJECTIVES Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF), under contracting activity N4523A, is conducting market research to: Assess Commercial & Modified COTS Availability: Determine whether commercial products currently available in the commercial marketplace—or commercial products that can be modified of a type customarily available in the commercial marketplace to meet the Government's requirement—satisfy PSNS & IMF's operational parameters pursuant to RFO FAR Part 12. Evaluate Customary Commercial Practices & Customary Modifications: In accordance with RFO FAR Subpart 12.1 (Pre-solicitation), identify commercial practices regarding warranties, maintenance intervals, testing, and delivery terms, and understand the degree of adaptation required to configure commercial industrial nitrogen plants into shipyard-ready, containerized units. Obtain Specification Feedback: Solicit industry input, risk assessments, and recommendations regarding the Government's draft performance requirements to eliminate overly restrictive or non-commercial specifications. Refine Acquisition Strategy: Gauge market maturity, delivery lead times, First Article Test (FAT) feasibility, and cost drivers to structure an optimal commercial IDIQ solicitation under streamlined RFO FAR Part 12 procedures. 3. CONTEMPLATED CONTRACT STRUCTURE & SCOPE The Government is contemplating an Indefinite Delivery / Indefinite Quantity (IDIQ) contract structure utilizing FAR Part 12 (Acquisition of Commercial Products and Commercial Services) streamlined procedures in conjunction with FAR Part 15 (Contracting by Negotiation): Item Categorization: Modified Commercial Product. The baseline generation system must rely on active production commercial products and components with active commercial part-numbers; prototype or unproven "pre-production" components are not authorized. First Article Test (FAT) Unit: Two (2) initial units subject to qualification, Nationally Recognized Testing Laboratory (NRTL) inspection, independent accredited laboratory gas purity verification, and operational verification testing. Production Units: Up to ten (10) production units to be ordered via firm-fixed-price delivery orders across the ordering period based on shipyard operational requirements and subject to availability of funds. Support Services & Spares: Delivery, initial on-site commissioning, operational verification, 24 months of spare consumable parts, standard commercial documentation and manuals, and optional multi-year maintenance service agreements. Contemplated Source Selection Method: Best Value with Tradeoffs in accordance with RFO FAR 12.203 and FAR Part 15, where technical capability, system reliability, delivery schedule, and past performance will be evaluated in relation to total evaluated price. Lowest Price Technically Acceptable in accordance with FAR Part 15, where the lowest price meeting or exceeding the acceptability standards for non-cost factors. 4. SUMMARY OF DRAFT TECHNICAL REQUIREMENTS The contemplated system is a ruggedized, portable, special-purpose gaseous nitrogen generation plant packaged for demanding maritime shipyard environments. See attached Draft Statement of Work. 5. REQUESTED INDUSTRY FEEDBACK (RFO FAR PART 12 MARKET RESEARCH) In alignment with RFO FAR Part 12 pre-solicitation policy to minimize barriers to commercial item procurement and identify standard commercial terms, industry partners are requested to provide feedback on the following: Topic A: Commercial Product Availability & Customary Commercial Practice • Does your firm currently manufacture, sell, or lease standard commercial nitrogen generation systems that achieve the requested purity? • Does your product qualify as a "Commercial Product" or a "Commercial Product with Modifications" under FAR 2.101? • What specific modifications would be required to adapt your standard commercial offering to meet the PSNS specifications (e.g., ISO container integration, shipyard color restrictions, specific alarm announcements, acoustic attenuation)? Are these modifications of a type customarily available in the commercial marketplace? • What are standard commercial warranty terms, customary commercial maintenance agreements, and commercial service intervals for equipment of this type? • Under RFO FAR Part 12, what standard commercial terms and conditions or financing practices should the Government consider incorporating or tailoring? Topic B: Technical Feasibility, Packaging, & Trade-offs • Is packaging the complete system within a single ISO container achievable using mature, non-developmental COTS components? • If bottle banks or compressors require external placement or a two-container configuration, what are the primary engineering trade-offs (e.g., thermal management, footprint, mobilization time)? • What technology type (e.g., multi-stage Pressure Swing Adsorption [PSA], catalytic deoxo purification, hybrid membrane/cryogenic) do you recommend to reliably achieve under fluctuating shipyard demand cycles? Topic C: Operational Profile & Maintenance Cycles • Is the requirement for 180 days of continuous operation without scheduled filter/oil/adsorbent servicing commercially standard or viable? If not, what is your standard commercial maintenance schedule? • Does the requirement for 7-day autonomous operation present any unforeseen failure modes or safety hazards in an unmanned industrial outdoor yard setting? Topic D: Acquisition Strategy, Lead Times, & Evaluation Factors • What is the realistic manufacturing, modification, and FAT lead time for an initial First Article unit following contract award? • What lead time is expected for follow-on production delivery orders (e.g., 1–3 units per order)? • What are the primary cost and schedule drivers in the draft requirements (e.g., purity verification, acoustic attenuations, marine coating, 180-day continuous run requirement)? • Under the contemplated FAR Part 12 / Part 15 Best Value Tradeoff framework, what commercial evaluation factors (e.g., past performance, demonstrated commercial reliability, warranty terms, life-cycle costs) would best enable offerors to propose innovative commercial solutions? 6. CAPABILITY STATEMENT SUBMISSION FORMAT & CONTENT Interested parties capable of providing these systems are requested to submit a Capability Statement addressing the following structure: Section 1: Administrative & Company Information Company Name, Address, Website, and Commercial and Government Entity (CAGE) Code. Unique Entity Identifier (UEI) under SAM.gov. Designated Point of Contact (Name, Title, Phone, Email). Business Size Status under primary NAICS Code (e.g., 333912 - Air and Gas Compressor Manufacturing, 336611, or other applicable codes): Large Business, Small Business, SDB, WOSB, VOSB, SDVOSB, HUBZone, or 8(a). Geographic location of manufacturing, integration, and service facilities. Section 2: Commercial Capabilities & Relevant Experience Detailed summary of standard commercial or modified COTS systems manufactured by your firm that demonstrate equivalent purity, flow rate, and delivery pressure. Provide commercial product cut sheets, brochures, or model numbers. Specific description of necessary modifications to adapt your commercial model to the PSNS environmental, enclosure, and safety constraints. Overview of system architecture, packaging concept (ISO enclosure vs. dual container), and control philosophy. Overview of field maintenance infrastructure capable of providing 3-year support, warranty service, and on-site commissioning at naval facilities in the Pacific Northwest. Provide up to three (3) examples of relevant commercial or government sales within the last five (5) years involving similar high-purity industrial or military gas generation systems. Include customer points of contact and contract/order values. Section 3: Specification Feedback & Rough Order of Magnitude (ROM) Specific comments, suggested modifications, or clarifications on the technical requirements summarized in Section 4 and Topic questions in Section 5. Non-binding Rough Order of Magnitude (ROM) unit pricing estimates for: First Article Test (FAT) Unit (per-unit cost for 2 units, including qualification, modifications, and initial testing). Production Units (per-unit cost for up to 10 units across an IDIQ lifecycle). 24-Month consumable spare parts package. Standard commercial warranty terms and optional 5-Year comprehensive maintenance contract. 7. SUBMISSION INSTRUCTIONS & CONTACT INFORMATION * **Response Deadline:** Responses are requested by: 16 October 2026 , no later than 16:00 Pacific Time. * **Submission Medium:** Electronic submissions only in Adobe PDF or Microsoft Word format. Page count should not exceed fifteen (15) pages (excluding standard product specification sheets or brochures). * **Proprietary Data:** If your response contains proprietary or business-sensitive information, each page containing such data must be clearly labeled and marked accordingly. * **Submittal Point of Contact:** All responses, questions, and inquiries regarding this notice must be submitted via email to: Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) Attn: Contracting Department (Code 400 / N4523A) Contracting Officer: George Ball - [email protected] Contracting Officer: James Kibbee - [email protected] Contract Specialist: Lennie Daye - [email protected] Subject Line: *Response to RFI - PSNS Portable High-Purity N2 Generator (N4523A27RFI0801)

"Update 10/7/2026: The Government's responses to vendor questions have been released. See attachment: RFI Notice N4523A27RFI0801 Q_A. 1. DISCLAIMER & SPECIAL NOTICES This Request for Information (RFI) is issued solely for market research, planning, and information purposes in accordance with Federal Acquisition Regulation (FAR) 10.002, FAR Part 12 (as updated under the Revolutionary FAR Overhaul [RFO] model class deviation and E.O. 14275), FAR 15.201(e), and FAR 52.215-3 (Request for Information or Solicitation for Planning Purposes). No Solicitation Exists: This notice does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), a Request for Quotations (RFQ), or a promise to issue any solicitation in the future. No Commitment: Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The issuance of this RFI does not commit the U.S. Government to contract for any product or service whatsoever, nor does it guarantee that a formal procurement will result. Commerciality & RFO Part 12 Application: Market research obtained via this notice will assist the Contracting Officer in determining whether commercial procedures under rewritten FAR Part 12 apply and whether contemplated items meet the statutory definition of a "Commercial Product" or "Commercial Product with Modifications" pursuant to 10 U.S.C. §§ 3451–3453 and FAR 2.101. No Reimbursement: The Government will not pay for any information, administrative costs, travel, or submissions incurred in responding to this RFI. All submitted materials shall become Government property and will not be returned. Responders are advised that the U.S. Government will not be held liable for any use or disclosure of data provided in response to this notice unless clearly marked with proprietary rights legends. 2. PURPOSE & OBJECTIVES Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF), under contracting activity N4523A, is conducting market research to: Assess Commercial & Modified COTS Availability: Determine whether commercial products currently available in the commercial marketplace—or commercial products that can be modified of a type customarily available in the commercial marketplace to meet the Government's requirement—satisfy PSNS & IMF's operational parameters pursuant to RFO FAR Part 12. Evaluate Customary Commercial Practices & Customary Modifications: In accordance with RFO FAR Subpart 12.1 (Pre-solicitation), identify commercial practices regarding warranties, maintenance intervals, testing, and delivery terms, and understand the degree of adaptation required to configure commercial industrial nitrogen plants into shipyard-ready, containerized units. Obtain Specification Feedback: Solicit industry input, risk assessments, and recommendations regarding the Government's draft performance requirements to eliminate overly restrictive or non-commercial specifications. Refine Acquisition Strategy: Gauge market maturity, delivery lead times, First Article Test (FAT) feasibility, and cost drivers to structure an optimal commercial IDIQ solicitation under streamlined RFO FAR Part 12 procedures. 3. CONTEMPLATED CONTRACT STRUCTURE & SCOPE The Government is contemplating an Indefinite Delivery / Indefinite Quantity (IDIQ) contract structure utilizing FAR Part 12 (Acquisition of Commercial Products and Commercial Services) streamlined procedures in conjunction with FAR Part 15 (Contracting by Negotiation): Item Categorization: Modified Commercial Product. The baseline generation system must rely on active production commercial products and components with active commercial part-numbers; prototype or unproven "pre-production" components are not authorized. First Article Test (FAT) Unit: Two (2) initial units subject to qualification, Nationally Recognized Testing Laboratory (NRTL) inspection, independent accredited laboratory gas purity verification, and operational verification testing. Production Units: Up to ten (10) production units to be ordered via firm-fixed-price delivery orders across the ordering period based on shipyard operational requirements and subject to availability of funds. Support Services & Spares: Delivery, initial on-site commissioning, operational verification, 24 months of spare consumable parts, standard commercial documentation and manuals, and optional multi-year maintenance service agreements. Contemplated Source Selection Method: Best Value with Tradeoffs in accordance with RFO FAR 12.203 and FAR Part 15, where technical capability, system reliability, delivery schedule, and past performance will be evaluated in relation to total evaluated price. Lowest Price Technically Acceptable in accordance with FAR Part 15, where the lowest price meeting or exceeding the acceptability standards for non-cost factors. 4. SUMMARY OF DRAFT TECHNICAL REQUIREMENTS The contemplated system is a ruggedized, portable, special-purpose gaseous nitrogen generation plant packaged for demanding maritime shipyard environments. See attached Draft Statement of Work. 5. REQUESTED INDUSTRY FEEDBACK (RFO FAR PART 12 MARKET RESEARCH) In alignment with RFO FAR Part 12 pre-solicitation policy to minimize barriers to commercial item procurement and identify standard commercial terms, industry partners are requested to provide feedback on the following: Topic A: Commercial Product Availability & Customary Commercial Practice • Does your firm currently manufacture, sell, or lease standard commercial nitrogen generation systems that achieve the requested purity? • Does your product qualify as a "Commercial Product" or a "Commercial Product with Modifications" under FAR 2.101? • What specific modifications would be required to adapt your standard commercial offering to meet the PSNS specifications (e.g., ISO container integration, shipyard color restrictions, specific alarm announcements, acoustic attenuation)? Are these modifications of a type customarily available in the commercial marketplace? • What are standard commercial warranty terms, customary commercial maintenance agreements, and commercial service intervals for equipment of this type? • Under RFO FAR Part 12, what standard commercial terms and conditions or financing practices should the Government consider incorporating or tailoring? Topic B: Technical Feasibility, Packaging, & Trade-offs • Is packaging the complete system within a single ISO container achievable using mature, non-developmental COTS components? • If bottle banks or compressors require external placement or a two-container configuration, what are the primary engineering trade-offs (e.g., thermal management, footprint, mobilization time)? • What technology type (e.g., multi-stage Pressure Swing Adsorption [PSA], catalytic deoxo purification, hybrid membrane/cryogenic) do you recommend to reliably achieve under fluctuating shipyard demand cycles? Topic C: Operational Profile & Maintenance Cycles • Is the requirement for 180 days of continuous operation without scheduled filter/oil/adsorbent servicing commercially standard or viable? If not, what is your standard commercial maintenance schedule? • Does the requirement for 7-day autonomous operation present any unforeseen failure modes or safety hazards in an unmanned industrial outdoor yard setting? Topic D: Acquisition Strategy, Lead Times, & Evaluation Factors • What is the realistic manufacturing, modification, and FAT lead time for an initial First Article unit following contract award? • What lead time is expected for follow-on production delivery orders (e.g., 1–3 units per order)? • What are the primary cost and schedule drivers in the draft requirements (e.g., purity verification, acoustic attenuations, marine coating, 180-day continuous run requirement)? • Under the contemplated FAR Part 12 / Part 15 Best Value Tradeoff framework, what commercial evaluation factors (e.g., past performance, demonstrated commercial reliability, warranty terms, life-cycle costs) would best enable offerors to propose innovative commercial solutions? 6. CAPABILITY STATEMENT SUBMISSION FORMAT & CONTENT Interested parties capable of providing these systems are requested to submit a Capability Statement addressing the following structure: Section 1: Administrative & Company Information Company Name, Address, Website, and Commercial and Government Entity (CAGE) Code. Unique Entity Identifier (UEI) under SAM.gov. Designated Point of Contact (Name, Title, Phone, Email). Business Size Status under primary NAICS Code (e.g., 333912 - Air and Gas Compressor Manufacturing, 336611, or other applicable codes): Large Business, Small Business, SDB, WOSB, VOSB, SDVOSB, HUBZone, or 8(a). Geographic location of manufacturing, integration, and service facilities. Section 2: Commercial Capabilities & Relevant Experience Detailed summary of standard commercial or modified COTS systems manufactured by your firm that demonstrate equivalent purity, flow rate, and delivery pressure. Provide commercial product cut sheets, brochures, or model numbers. Specific description of necessary modifications to adapt your commercial model to the PSNS environmental, enclosure, and safety constraints. Overview of system architecture, packaging concept (ISO enclosure vs. dual container), and control philosophy. Overview of field maintenance infrastructure capable of providing 3-year support, warranty service, and on-site commissioning at naval facilities in the Pacific Northwest. Provide up to three (3) examples of relevant commercial or government sales within the last five (5) years involving similar high-purity industrial or military gas generation systems. Include customer points of contact and contract/order values. Section 3: Specification Feedback & Rough Order of Magnitude (ROM) Specific comments, suggested modifications, or clarifications on the technical requirements summarized in Section 4 and Topic questions in Section 5. Non-binding Rough Order of Magnitude (ROM) unit pricing estimates for: First Article Test (FAT) Unit (per-unit cost for 2 units, including qualification, modifications, and initial testing). Production Units (per-unit cost for up to 10 units across an IDIQ lifecycle). 24-Month consumable spare parts package. Standard commercial warranty terms and optional 5-Year comprehensive maintenance contract. 7. SUBMISSION INSTRUCTIONS & CONTACT INFORMATION * **Response Deadline:** Responses are requested by: 16 October 2026 , no later than 16:00 Pacific Time. * **Submission Medium:** Electronic submissions only in Adobe PDF or Microsoft Word format. Page count should not exceed fifteen (15) pages (excluding standard product specification sheets or brochures). * **Proprietary Data:** If your response contains proprietary or business-sensitive information, each page containing such data must be clearly labeled and marked accordingly. * **Submittal Point of Contact:** All responses, questions, and inquiries regarding this notice must be submitted via email to: Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) Attn: Contracting Department (Code 400 / N4523A) Contracting Officer: George Ball - [email protected] Contracting Officer: James Kibbee - [email protected] Contract Specialist: Lennie Daye - [email protected] Subject Line: *Response to RFI - PSNS Portable High-Purity N2 Generator (N4523A27RFI0801)

Proposed procurement for NSN 4310016215575 PISTON,COMPRESSOR: Line 0001 Qty 11 UI EA Deliver To: By: 0093 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved sources are 1KWT0 031 881; 1KWT0 WP65L TM PG E-5 ITEM 5. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310010170605 PISTON,COMPRESSOR: Line 0001 Qty 4 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0407 DAYS ADO Approved source is 8FGX3 1H32343A. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310123608064 CYLINDER,RECIPROCATING: Line 0001 Qty 1 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0196 DAYS ADO Approved source is D8265 061664. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4320014296053 GLAND PLATE,PUMP: Line 0001 Qty 13 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0220 DAYS ADO Approved source is 71724 H-2375-040-7869. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310010596086 CYLINDER HEAD,COMPR: Line 0001 Qty 5 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0414 DAYS ADO Approved source is 830Q4 220462F1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310010575735 GUIDE,CROSSHEAD: Line 0001 Qty 14 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0211 DAYS ADO Approved sources are 830Q4 8002B; 8FGX3 8002B. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310013169715 PISTON,PISTON GUIDE: Line 0001 Qty 6 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0394 DAYS ADO Approved sources are 0AT62 11184256; 8FGX3 11184256. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310011439434 CYLINDER: Line 0001 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0483 DAYS ADO Approved sources are 0AT62 8843B; 830Q4 220898B1; 8FGX3 8843B. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310014631152 FILTER ASSEMBLY,FLUID: Line 0001 Qty 84 UI AY Deliver To: By: 0120 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 12. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310015206794 AIR CLEANER,INTAKE: Line 0001 Qty 262 UI EA Deliver To: By: 0084 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 39. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 0C1P4 627-12H. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Proposed procurement for NSN 4310016080435 FILTER ELEMENT,INTAKE: Line 0001 Qty 282 UI EA Deliver To: By: 0074 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 42. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 5FNT1 C 16 400. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.