Aircraft Manufacturing Government Contracts

Indefinite Delivery Contract: Estimated quantity 683.000 ; Not to Exceed 350,000.00

Solicitation SPE4A726T780U for 58--CONTROLLER,HAND,INTERACTIVE published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

The Naval Air Systems Command (NAVAIR) awarded Delivery Order N0001926F1204, under Basic Ordering Agreement N0001923G0002, to Sikorsky, A Lockheed Martin Company, of 6900 Main St. Stratford, CT 06615-9129, on an other than full and open competitive basis. Pursuant to 10 U.S.C. 2304(c)(1) and FAR 6.302-1, "Only One Responsible Source and No Other Type of Supplies or Services will Satisfy Agency Requirements." Sikorsky is the sole designer, developer and manufacturer of the H-53 airframe, as well as the sole integrator of the avionics and weapons systems, and therefore is the only contractor with the requisite knowledge, experience, and technical data that can meet the Government's requirements on a timely basis.

Solicitation SPE4A726Q0933 for 16--COVER INSULATING,BL published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation SPE4A726RXB09 for 16--PLATE ASSEMBLY,ROTARY RUDDER published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

The Naval Air Systems Command (NAVAIR), NAS Patuxent River, MD, awarded Northrop Grumman Systems Corporation (NGSC), San Diego, CA, a sole source Delivery order N0001927F1026 under BOA N0001925G0003 in the amount of $66,041,453 on 5 October 2026. in support of the MQ-4C program. The delivery order is for the procurement of recurring engineering retrofit effort to incorporate multiple Engineering Change Proposals (ECPs) into fielded aircraft in support of the United States Navy (USN) and Royal Australian Air Force (RAAF). This acquisition was pursued on a sole-source basis under statutory authority of under Title 10 U.S.C. 3204(a)(1) as implemented by FAR 6.103-1, only one responsible source and no other supplies or services will satisfy agency requirements per Class Justification & Approval (CJ&A) 25-0131 – redacted version attached to this announcement. As the sole designer, developer and manufacturer of the MQ-4C Triton UAS, NGSC is the only known responsible source possessing the engineering data; technical skills; and requisite knowledge of the design, fabrication, performance, and operational characteristics of the MQ-4C UAS required to perform the necessary follow-on production efforts within the required timeframes and without substantial duplication of cost and unacceptable delay. Note: THIS IS NOT A REQUEST FOR PROPOSAL. Companies interested in subcontracting opportunities should contact Northrop Grumman Systems Corporation – Aerospace Systems attention: Vicky Harper-Hall, Socio-Economic Programs Sector Manager, email: [email protected] or phone (310) 331-3824.

Due date for proposals is extended to 10/15/2026 5PM Eastern. __________________________________________________________________________________________________ U.S. Customs and Border Protection (CBP) is issuing Solicitation No. 70B06C26R00000185 for a controlled UAS platform requirement. This acquisition is anticipated to be a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS 336411 and PSC 1550. Due to the sensitive nature of the requirement and associated law enforcement operational information, the full solicitation package, Statement of Work, technical attachments, and supporting documentation will not be posted publicly on SAM.gov. Eligible SDVOSB vendors may request access to the solicitation package by contacting the Contracting Officer. To be considered for access, vendors must: • Be registered and active in SAM.gov; • Be an eligible SDVOSB concern; • Demonstrate apparent capability to perform the requirement; • Execute DHS Form 11000-6, Non-Disclosure Agreement, dated 08/18, and initial the Other Sensitive but Unclassified (SBU) category; • Agree to limit access to solicitation materials to personnel with a need to know; and • Agree not to reproduce, disclose, distribute, post, transmit, or further disseminate solicitation materials without prior written approval from the Contracting Officer. Access requests shall be submitted by email to: Shaun G. Saad Contracting Officer [email protected] Access requests shall include: • Company legal name; • Unique Entity ID (UEI); • CAGE code; • Confirmation of active SAM.gov registration; • SDVOSB certification/status information; • Company point of contact, including name, title, phone number, and email address; • A brief capability statement addressing relevant UAS platform, integration, testing, training, and support experience; and • Confirmation that the vendor is willing to execute DHS Form 11000-6 and comply with controlled document handling restrictions. Submission of an access request does not guarantee access to the solicitation package. CBP will review requests and determine whether release of controlled documents is appropriate. This notice does not include the full solicitation package. The Government will not reimburse costs incurred in responding to this notice or requesting access to solicitation materials. The controlled solicitation materials may include Sensitive But Unclassified (SBU) information, including Law Enforcement Sensitive (LES) information. Vendors requesting access must complete DHS Form 11000-6, Non-Disclosure Agreement, and initial the “Other Sensitive but Unclassified (SBU)” category before CBP will release the controlled solicitation package. Execution of DHS Form 11000-6 does not guarantee access. CBP will review each request and determine whether release of controlled documents is appropriate.

This notice supplements the Air Force Small UAS & Asymmetric Capabilities – Commercial Solutions Opening (CSO), Notice ID: FA8629-26-S-C001, available at [https://sam.gov/workspace/contract/opp/f2adca647af04d61b6ed30dc0d131fd4/view]. Call 001 is seeking innovative commerical solutions and technologies to advance small UAS and asymmetric mission capabilites. Details are provided in the attachment.

Proposed procurement for NSN 1560014460031 DUCT ASSEMBLY,BLEED AI: Line 0001 Qty 2 UI EA Deliver To: DIRECTOR OF DEPOT SUPPLY By: 0245 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DIRECTOR OF DEPOT SUPPLY By: 0245 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Proposed procurement for NSN 5330013384829 GASKET: Line 0001 Qty 357 UI EA Deliver To: By: 0032 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 53. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved sources are 15434 4026171; K4843 3069103. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Due date for proposals is extended to 10/21/2026 5PM Eastern. __________________________________________________________________________________________________ U.S. Customs and Border Protection (CBP) is issuing Solicitation No. 70B06C26R00000185 for a controlled UAS platform requirement. This acquisition is anticipated to be a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS 336411 and PSC 1550. Due to the sensitive nature of the requirement and associated law enforcement operational information, the full solicitation package, Statement of Work, technical attachments, and supporting documentation will not be posted publicly on SAM.gov. Eligible SDVOSB vendors may request access to the solicitation package by contacting the Contracting Officer. To be considered for access, vendors must: • Be registered and active in SAM.gov; • Be an eligible SDVOSB concern; • Demonstrate apparent capability to perform the requirement; • Execute DHS Form 11000-6, Non-Disclosure Agreement, dated 08/18, and initial the Other Sensitive but Unclassified (SBU) category; • Agree to limit access to solicitation materials to personnel with a need to know; and • Agree not to reproduce, disclose, distribute, post, transmit, or further disseminate solicitation materials without prior written approval from the Contracting Officer. Access requests shall be submitted by email to: Shaun G. Saad Contracting Officer [email protected] Access requests shall include: • Company legal name; • Unique Entity ID (UEI); • CAGE code; • Confirmation of active SAM.gov registration; • SDVOSB certification/status information; • Company point of contact, including name, title, phone number, and email address; • A brief capability statement addressing relevant UAS platform, integration, testing, training, and support experience; and • Confirmation that the vendor is willing to execute DHS Form 11000-6 and comply with controlled document handling restrictions. Submission of an access request does not guarantee access to the solicitation package. CBP will review requests and determine whether release of controlled documents is appropriate. This notice does not include the full solicitation package. The Government will not reimburse costs incurred in responding to this notice or requesting access to solicitation materials. The controlled solicitation materials may include Sensitive But Unclassified (SBU) information, including Law Enforcement Sensitive (LES) information. Vendors requesting access must complete DHS Form 11000-6, Non-Disclosure Agreement, and initial the “Other Sensitive but Unclassified (SBU)” category before CBP will release the controlled solicitation package. Execution of DHS Form 11000-6 does not guarantee access. CBP will review each request and determine whether release of controlled documents is appropriate.

Disclaimer THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. This Sources Sought notice is being posted to satisfy the requirement of Defense Federal Acquisition Regulation Supplement PGI 206.103-170. The Naval Air Systems Command (NAVAIR), PMA-265 is conducting market research to identify potential sources with the expertise, capabilities, and experience for the F/A-18 E/F and EA-18G aircraft inspections, modifications, repairs, and F/A-18 E/F and EA-18G Inner Wing Panel (IWP) modifications and repairs. The remanufacturing efforts for the F/A-18 E/F and EA-18G will restore aircraft and IWP service life projections to the new design specifications. THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. The results of this Sources Sought will be utilized to determine if the required product exists in the marketplace and if any Small Business Set-Aside opportunities exist. All Small Business Set-Aside categories will be considered. A site visit is required to determine a suitable source. Eligibility The Product Service Code (PSC) for this requirement is K015 (Modification of Equipment - Aircraft and Airframe Structural Components). The NAICS code is 336411 (Aircraft Manufacturing). REQUIRED CAPABILITIES • Relevant Experience: Proven past performance executing complex structural repairs, remanufacturing, and Service Life Extension Programs (SLEP) on F/A-18 E/F, EA-18G, or similar tactical aircraft, including Inner Wing Panel (IWP) analysis. • Liaison Engineering: Capability to provide on-site or reach-back liaison engineering support to rapidly resolve discrepancies, document non-conformances, and design localized repairs when standard technical manuals do not cover the structural degradation found, specifically corrosion issues. • Engineering & Technical Proficiency: Ability to interpret and execute Original Equipment Manufacturer (OEM) (Boeing) Technical Data Packages (TDPs), provide liaison engineering for structural deviations, and perform advanced Non-Destructive Inspections (NDI). • Facilities, Tooling & Security: Possession of adequate hangar space, specialized structural tooling, and the requisite Facility Security Clearances (FCL) and personnel clearances (e.g., SECRET) to handle tactical aircraft and systems. • Quality & Safety Compliance: An established Quality Management System (QMS) certified to AS9100/AS9110 (or DCMA-approved equivalent), and strict adherence to NAVAIR ground and flight safety regulations. • Supply Chain Management: Demonstrated ability to source military-grade aviation materials and proactively manage Diminishing Manufacturing Sources and Material Shortages (DMSMS).

Proposed procurement for NSN 1615010921988 DAMPER TUBE ASSEMBLY: Line 0001 Qty 1 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0250 DAYS ADO Line 0002 Qty 8 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0250 DAYS ADO Line 0003 Qty 14 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0250 DAYS ADO Line 0004 Qty 270 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0250 DAYS ADO Line 0005 Qty 456 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0250 DAYS ADO Approved sources are 33682 S6137-64329-002; 4T362 S6137-64329-002; 65780 S6137-64329-002; 78286 S6137-64329-002. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Proposed procurement for NSN 5999000053272 WIRE MESH,KNITTED: Line 0001 Qty 1022 UI EA Deliver To: By: 0085 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 153. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved sources are 07700 SM-B-450436-3; 0PL74 1026-08010-34; 18565 03-0804-A928; 2S308 FRESMB450436-3; 64411 2010-1000-0152. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

The Naval Air Systems Command, PMA-265 (Program Office for F/A-18 and EA-18G Aircraft), intends to solicit and negotiate a modification to existing Delivery Order N0001920F0870 under sole-source Basic Ordering Agreement (BOA) N00019-16-G-0001 with The Boeing Company. This action will procure supplies and services associated with requirements refinements under Engineering Change Proposal (ECP) 6516 for the F/A-18E/F, EA-18G, AF/A-18F, and AEA-18G Advanced Cockpit System (ACS) Upgrade. The modification will include engineering, design, drawing, and Technical Directive (TD) updates across the applicable aircraft configurations. Specifically, the scope encompasses incorporating Service Life Modernization (SLM) redlines through Redline 120 into AFC-729 and AFC-730, incorporating Advanced Networking Infrastructure (ANI) uncap/unstow wiring procedures, updating the Warning, Advisory, Threat (WAT) panel part number in AFC-730, updating the High Definition Video Recorder (HDVR) part number into AFC-729 and AFC-730, and updating retrofit drawings associated with ECP 6516, ECP 6514 (HDVR System Incorporation), and ECP 6552 (Replacement of HDVR Door) to enable a single engineering drawing release across F/A-18E/F, EA-18G, AF/A-18F, and AEA-18G aircraft. This BOA was awarded on a sole source basis to Boeing in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by FAR Part 6.302-1, “Only one responsible source and no other supplies or services will satisfy agency requirements.” Boeing is the only company with the unique knowledge, experience, special skills, facilities, manufacturing techniques, and technical data required to support the above mentioned Advanced Cockpit System (ACS) Upgrade / F/A-18 and EA-18G aircraft weapon systems. THIS NOTICE IS PUBLISHED FOR INFORMATION PURPOSES ONLY AND IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. A determination by the Government not to compete this procurement based upon responses to this notice is solely within the discretion of the Government. The Government will not pay for any responses received. There are no commitments by the Government to issue any solicitations, make an award or awards, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted. Information provided herein is subject to change and in no way binds the Government to solicit for or award a delivery order. For small business or subcontracting opportunities, contact The Boeing Company Small Business Liaison Officer, Taylor Beitler, [email protected].

The federal government has issued this official active requirement (SPE4A526T342D) on SAM.gov. Complete technical specifications, statements of work, evaluation criteria, and attachments are accessible directly on the authoritative federal record.

Post Redacted Sole Source Justification for Unmanned Aircraft System (UAS) in accordance with RFO 6.301.

The United States (US) Air Force Life Cycle Management Center (AFLCMC), Intelligence, Surveillance, and Reconnaissance & Special Operations Forces (ISR & SOF) Asymmetric Warfare Division (AFLCMC/WIS) is conducting market research via this Request for Information (RFI) to identify future sustainment approaches. The objective is to provide highly agile, comprehensive contractor support for an operational fleet of small unmanned aircraft systems. Interested parties should refer to the attached pdf. for additional information and instructions.

THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. The Naval Air Systems Command, PMA-265 (Program Office for F/A-18 & EA-18G Aircraft), intends to solicit The Boeing Company for an Order against an existing Basic Ordering Agreement (BOA), for supplies and services associated with the Stores Management Processor (SMP) Obsolescence Diminishing Manufacturing Sources and Material Shortages (DMSMS) Mitigation. The order will include but not limit the scope of work to design and qualify alternate parts to replace obsolete components of the SMP of the AYK-22 Stores Management Processor (SMP). The AYK-22 SMP functions as an interface between the aircraft mission computer and the aircraft weapons and external stores. The Government has determined that the AYK-22 SMP is no longer supportable due to obsolescence of key components. DISCLAIMER: THIS SOURCES SOUGHT NOTICE ANNOUNCEMENT IS NOT A REQUEST FOR PROPOSAL (RFP), BUT RATHER A REQUEST FOR INFORMATION (RFI) from industry that will allow the Government to identify interested sources capable of meeting the requirements. This RFI is issued solely for market research, planning and information purposes and is not to be construed as a commitment by the Government to enter into a contractual agreement, nor will the Government pay for information solicited hereunder. There is no commitment by the Government to issue a solicitation, make an award, or be responsible for any monies expended by any interested parties in support of the effort mentioned above. The Government is interested in receiving vendors’ commercial published price lists for items they believe meet the need in this RFI. The Government is also interested in lead-time and current stock level. All data received in response to this RFI, marked or designated as corporate or proprietary, will be fully protected from release outside the Government. Failure to respond to this RFI does not preclude participation in any future associated RFP that may be issued. Information provided herein is subject to change and in no way binds the Government to solicit or award a contract. If a solicitation is released, it will be synopsized on the System for Award Management (SAM) website: www.sam.gov. It is the potential offeror’s responsibility to monitor this site for the release of any follow-on information. Submission Instructions Interested parties are requested to submit a capability statement of no more than one (1) page in length (8.5 x 11-inch pages, font no smaller than 12-point, 1.5 line spaced) demonstrating their ability to provide the specified components. The capability statement should be in bullet point format and should include, at a minimum, the following: 1. Company Name, Company Address, Company Business Size, CAGE code, UEI number and Point-Of-Contact (POC) information to include POC’s name, phone number, and email address. 2. A detailed description of the company's experience in procuring and qualifying obsolete electronic components for military aerospace applications. 3. Evidence of access to the required technical data and specifications for the listed components. 4. A description of the company's quality assurance processes and certifications. 5. Any other relevant information that demonstrates the company's ability to meet the Government's requirements. Responses shall be submitted electronically to the designated Contract Specialist, Cassaundra Somerville in Microsoft Word format or Portable Document Format (PDF) at the following email address: [email protected] All responses, including capability statements, shall be submitted no later than 5:00 PM EST, 28 October 2026. All information submitted should be unclassified.