New Jersey Federal Contracts & Bids

Solicitation 36C10B26F0355 for Oracle Cloud Credits and Professional Services published by VETERANS AFFAIRS, DEPARTMENT OF. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.

Solicitation 36C10B26F0401 for 7D20--Abacus Visual Playbook Builder and Automation Orchestrator published by VETERANS AFFAIRS, DEPARTMENT OF. Prospective offerors must consult official solicitation documents on SAM.gov for full instructions, specifications, and submission deadlines.

Purpose of this posting is to synopsize the award, as well as posting the Redacted J&A.

N6833526C1077 was awarded to Bloomy Controls Inc (1ZG80) for the ALRE DAQ System. The place of performance is at the Government Facility. Related notice of the award synopsis is N6833526Q1113.

Solicitation FA448426D0012 for Holistic Health and Fitness Support published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

The contract for Pest Control services was awarded to Force Group (CAGE 8W0J6) fora total contract value of $1,084,980.66.

The Transportation Security Administration (TSA), through the Chemistry & Explosives Branch (CEB), has a requirement to procure an Agilent CrossLab Silver preventative maintenance service agreement for the Agilent Gas Chromatography Mass Spectrometer (GC/MS) 7250 Quadrupole Time of Flight (QTOF) System used in the Chemistry Lab. The agreement will cover one (1) 12-month base year of service, with the option to exercise up to four (4) 12-month option years. This maintenance service is essential to ensure the equipment is properly calibrated and operating at optimal standards to ensure the research and analysis is accurate, as this data affects how Canine Explosives Training Aids (CETA) are prepared, configured, and packaged.

The Agilent CrossLab Silver GC/MS Triple Quad maintenance plan is for one 12-month base year for and estimated value of $21,485.52. and only offered on an annual basis due to the age of the instrument. This service plan ensures continuous maintenance of the equipment, minimizing operational disruptions and supporting the critical mission of explosive detection canine training and mission readiness. The instrument and its components are proprietary to Agilent Technologies, the original equipment manufacturer (OEM) of the Agilent GC/MS Triple Quad System; therefore, only Agilent-certified engineers are qualified to perform the annual CrossLab Silver preventive maintenance service.

Solicitation SPRTA1-26-C-0143 for ACTUATOR, ELECTRO-MECHANICAL, NSN# 1680010087442RK / PN# L16-107 published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation FA448426P0019 for Handheld Explosive Trace Detectors published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

Solicitation FA448426Q0030 for Web-Based Training published by DEPT OF DEFENSE. Contractors must submit responses conforming to the requirements in the official SAM.gov solicitation notice and associated attachments.

The TSA CEB has a requirement to procure an Agilent CrossLab Silver preventative maintenance agreement for the Agilent Gas Chromatography Mass Spectrometer (GC/MS) Single Quad system with no headspace. This is a necessary requirement to ensure proper operations of the CEB analytical lab equipment which is used for mission-critical research and analysis of Canine Explosive Training Aids (CETA) which are utilized by canine teams in the TSA National Explosives Detection Canine Team Program (NEDCTP) for mission-critical training and mission readiness. Based on past experience, Agilent Technologies is the only qualified vendor. As the OEM, they have readily available replacement parts; they use the same OEM parts to replace faulty parts; and their technicians Agilent-certified which makes them the only qualified, with equipment software.

* RFO 52.232-18 Availabilty of Funds: Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.* This is a combined synopsis/solicitation for commercial items prepared in accordance with Revolutionary FAR Overhaul (RFO) part 12., as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Offers are being requested and a separate written solicitation will not be issued. The solicitation number for this procurement is FA448426Q0017 and is a Request for Quotation (RFQ). The North American Industry Classification System (NAICS) is 238220 – Plumbing, Heating, and Air-Conditioning Contractors. Description of Requirement: The requirement is for Kitchen Exhaust Hood Maintenance to perform annual, semi-annual, quarterly preventative maintenance and certifications on commercial kitchen exhaust systems to include the plenum water wash fire protection systems. The contractor shall ensure all exhaust systems are certified in accordance with government regulations following the preventative maintenance and repair process. Additional details can be found in “Attachment 1 - PWS Kitchen Exhaust Revised REV 2_25 Aug 2026” Mission Essential Services: This requirement has been deemed mission essential and will require submittal of a Mission Essential Service plan detailing how services will still be performed IAW “Attachment 13 - Mission-Essential Contractor Services KEHM_ 25 Aug 2026” Period of Performance: 1 Base and 4 Options Years w/6-month extension option 1 December 2026 – 31 May 2032. • Base Year: 1 December 2026 – 30 November 2027 • Option Year 1: 1 December 2027 – 30 November 2028 • Option Year 2: 1 December 2028 – 30 November 2029 • Option Year 3: 1 December 2029 – 30 November 2030 • Option Year 4: 1 December 2030 – 30 November 2031 • 6 Month Extension: 1 December 2031 – 31 May 2032 Performance Location: Multiple Locations on Joint Base McGuire-Dix-Lakehurst, New Jersey, 08641 Set Aside: This is a total set-aside for section (8a) small business concerns under NAICS 238220. Only offers submitted by section 8(a) small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a section 8(a) small business concern will not be considered for award. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. Submitting an Offer: Offer Pricing will be submitted on a separate pricing sheet; failure to submit an offer for all CLINS will render the quote unacceptable and ineligible for award consideration in the absence of discussions. Please submit offers to this RFQ by emailing the response to Contracting Officer SSgt Alexander Kouba at the e-mail: [email protected] and Contract Specialist SSgt Noah. Horn at the e-mail: [email protected]. Offer Due Date: All offers are due no later than 12:00pm EST, 13 October 2026. AMENDMENT 0002 Solicitation has been amended to extend the quote due date to 13 October 2026. No other changes to the solicitation have occured. AMENDMENT 0001 Solicitation has been amended to extend the quote due date to 30 September 2026. No other changes to the solicitation have occured.

* RFO 52.232-18 Availabilty of Funds: Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.* This is a combined synopsis/solicitation for commercial items prepared in accordance with Revolutionary FAR Overhaul (RFO) part 12., as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Offers are being requested and a separate written solicitation will not be issued. The solicitation number for this procurement is FA448426Q0017 and is a Request for Quotation (RFQ). The North American Industry Classification System (NAICS) is 238220 – Plumbing, Heating, and Air-Conditioning Contractors. Description of Requirement: The requirement is for Kitchen Exhaust Hood Maintenance to perform annual, semi-annual, quarterly preventative maintenance and certifications on commercial kitchen exhaust systems to include the plenum water wash fire protection systems. The contractor shall ensure all exhaust systems are certified in accordance with government regulations following the preventative maintenance and repair process. Additional details can be found in “Attachment 1 - PWS Kitchen Exhaust Revised REV 2_25 Aug 2026” Mission Essential Services: This requirement has been deemed mission essential and will require submittal of a Mission Essential Service plan detailing how services will still be performed IAW “Attachment 13 - Mission-Essential Contractor Services KEHM_ 25 Aug 2026” Period of Performance: 1 Base and 4 Options Years w/6-month extension option 1 December 2026 – 31 May 2032. • Base Year: 1 December 2026 – 30 November 2027 • Option Year 1: 1 December 2027 – 30 November 2028 • Option Year 2: 1 December 2028 – 30 November 2029 • Option Year 3: 1 December 2029 – 30 November 2030 • Option Year 4: 1 December 2030 – 30 November 2031 • 6 Month Extension: 1 December 2031 – 31 May 2032 Performance Location: Multiple Locations on Joint Base McGuire-Dix-Lakehurst, New Jersey, 08641 Set Aside: This is a total set-aside for section (8a) small business concerns under NAICS 238220. Only offers submitted by section 8(a) small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a section 8(a) small business concern will not be considered for award. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. Submitting an Offer: Offer Pricing will be submitted on a separate pricing sheet; failure to submit an offer for all CLINS will render the quote unacceptable and ineligible for award consideration in the absence of discussions. Please submit offers to this RFQ by emailing the response to Contracting Officer SSgt Alexander Kouba at the e-mail: [email protected] and Contract Specialist SSgt Noah. Horn at the e-mail: [email protected]. Offer Due Date: All offers are due no later than 12:00pm EST, 13 October 2026. AMENDMENT 0002 Solicitation has been amended to extend the quote due date to 13 October 2026. No other changes to the solicitation have occured. A question was submitted regarding pricing for CLIN 0005 - Repairs and for CLIN 0006 - Mission Essential Services. CLIN 0005 will not be priced by the contractor as a NTE amount will be set by the government for that CLIN. Do not price this CLIN as it will be set at contract award. CLIN 0006 is for Mission Essential Services on a 365 day basis. This price should be for additional costs associated with implementing and executing the submitted Mission Essential Plan. This is supplemental to the normal cleanings that need performed and should cover the submitted Plans execution. This information should be carried across all option years for these CLINs. AMENDMENT 0001 Solicitation has been amended to extend the quote due date to 30 September 2026. No other changes to the solicitation have occured.

* RFO 52.232-18 Availabilty of Funds: Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.* This is a combined synopsis/solicitation for commercial items prepared in accordance with Revolutionary FAR Overhaul (RFO) part 12., as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Offers are being requested and a separate written solicitation will not be issued. The solicitation number for this procurement is FA448426Q0017 and is a Request for Quotation (RFQ). The North American Industry Classification System (NAICS) is 238220 – Plumbing, Heating, and Air-Conditioning Contractors. Description of Requirement: The requirement is for Kitchen Exhaust Hood Maintenance to perform annual, semi-annual, quarterly preventative maintenance and certifications on commercial kitchen exhaust systems to include the plenum water wash fire protection systems. The contractor shall ensure all exhaust systems are certified in accordance with government regulations following the preventative maintenance and repair process. Additional details can be found in “Attachment 1 - PWS Kitchen Exhaust Revised REV 2_25 Aug 2026” Mission Essential Services: This requirement has been deemed mission essential and will require submittal of a Mission Essential Service plan detailing how services will still be performed IAW “Attachment 13 - Mission-Essential Contractor Services KEHM_ 25 Aug 2026” Period of Performance: 1 Base and 4 Options Years w/6-month extension option 1 December 2026 – 31 May 2032. • Base Year: 1 December 2026 – 30 November 2027 • Option Year 1: 1 December 2027 – 30 November 2028 • Option Year 2: 1 December 2028 – 30 November 2029 • Option Year 3: 1 December 2029 – 30 November 2030 • Option Year 4: 1 December 2030 – 30 November 2031 • 6 Month Extension: 1 December 2031 – 31 May 2032 Performance Location: Multiple Locations on Joint Base McGuire-Dix-Lakehurst, New Jersey, 08641 Set Aside: This is a total set-aside for section (8a) small business concerns under NAICS 238220. Only offers submitted by section 8(a) small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a section 8(a) small business concern will not be considered for award. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. Submitting an Offer: Offer Pricing will be submitted on a separate pricing sheet; failure to submit an offer for all CLINS will render the quote unacceptable and ineligible for award consideration in the absence of discussions. Please submit offers to this RFQ by emailing the response to Contracting Officer SSgt Alexander Kouba at the e-mail: [email protected] and Contract Specialist SSgt Noah. Horn at the e-mail: [email protected]. Offer Due Date: All offers are due no later than 12:00pm EST, 13 October 2026. AMENDMENT 0002 Solicitation has been amended to extend the quote due date to 13 October 2026. No other changes to the solicitation have occured. A question was submitted regarding pricing for CLIN 0005 - Repairs and for CLIN 0006 - Mission Essential Services. CLIN 0005 will not be priced by the contractor as a NTE amount will be set by the government for that CLIN. Do not price this CLIN as it will be set at contract award. CLIN 0006 is for Mission Essential Services on a 365 day basis. This price should be for additional costs associated with implementing and executing the submitted Mission Essential Plan. This is supplemental to the normal cleanings that need performed and should cover the submitted Plans execution. This information should be carried across all option years for these CLINs. ATTACHMENT WITH PHOTOS OF KITCHEN HOODS HAS BEEN ADDED AMENDMENT 0001 Solicitation has been amended to extend the quote due date to 30 September 2026. No other changes to the solicitation have occured.

UPDATE AS OF 09/24/2026: • RFI Responses have been uploaded as of 9/24/26. Several attachments referenced in the RFI Response have also been uploaded. • A 2nd Site Visit has been scheduled for 09/29/2026 @ 10:30AM EST. See RFI Response document for Site Visit Instructions. • Proposal Due Date will be extended from 10/7/2026 to 10/14/2026. An amendment will be posted reflecting the date change NLT 09/28/2026. SOLICITATION INFORMATION 1. This Request for Proposal (RFP) is being solicited in accordance with the Federal Acquisition Regulations (FAR) Part 19.502-2 Total Small Business Set-Asides and the Partnership Agreement between the Department of Defense and the U.S. Small Business Administration. Competition under the FAR part 6.2 - Full and Open Competition After Exclusion of Sources – this Requirement has been 100% Set-Aside for Small Business Concerns . 2. The purpose of the Request for Proposal (RFP) is to procure construction services to Inspection and Testing of Electric and Diesel Fire Pumps, Engines, Controllers, and Oil/Water Separator at Building R38 , in support of Naval Weapons Station (NWS) Earle. Services are to be performed at Colts Neck, New Jersey. 3. Special clauses and requirements, including wages, work hours, safety and security regulations, etc. for this specific site/location of the work shall be defined herein and be repeated in any resultant contract. 4. Bonding Requirements: None 5. The mandatory Period of Performance: The contractor shall begin performance within 15 calendar days and complete it within 60 calendar days from date of issuance of Notice to Proceed. 6. Bid shall be valid no less than 60 days after offers are due. 7. The NAICS for this solicitation is: 811310 , Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. 8. One (1) Site Visit is scheduled for Wednesday, 9 September 2026 at 1030 EST. Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, September 9th at 1030 EST hours sharp. Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: 801 Highway 36-N, Leonardo, NJ, 07737. All interested Contractors must send a list of attendees NLT 1000 EST, Tuesday, September 8th so that adequate transportation can be arranged to: Engineering Tech., Azeb Hailu ([email protected]) Additional information for this solicitation can be found WITHIN the solicitation documents. Offerors are instructed to review all available information. Information regarding Site Visit, Requests for Information, Proposal Submission requirements, Basis of Award, Bonding Requirements, ETC are located within the solicitation SF 1449 document.

UPDATE AS OF 09/30/2026: 1. An additional Site Visit has been scheduled for Friday, 02 October 2026 at 1030 EST. • Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Friday, 02 October at 1030 EST hours sharp. • Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: • GPS: 801 Highway 36-N, Leonardo, NJ, 07737. • All interested Contractors must send a list of attendees NLT 0800 EST, Friday, 02 October so that adequate transportation can be arranged to: • Engineering Tech., Azeb Hailu ([email protected]) 2. The Proposal Due Date remains unchanged at 14 October 2026 NLT 1100 EST. An amendment will not be issued for this Site Visit notice. UPDATE AS OF 09/28/2026: • Amendment 0001 has been released and uploaded to this SAM.gov notice, officially reflecting the proposal due date change to 14 October 2026. UPDATE AS OF 09/24/2026: • RFI Responses have been uploaded as of 9/24/26. Several attachments referenced in the RFI Response have also been uploaded. • A 2nd Site Visit has been scheduled for 09/29/2026 @ 10:30AM EST. See RFI Response document for Site Visit Instructions. • Proposal Due Date will be extended from 10/7/2026 to 10/14/2026. An amendment will be posted reflecting the date change NLT 09/28/2026. SOLICITATION INFORMATION 1. This Request for Proposal (RFP) is being solicited in accordance with the Federal Acquisition Regulations (FAR) Part 19.502-2 Total Small Business Set-Asides and the Partnership Agreement between the Department of Defense and the U.S. Small Business Administration. Competition under the FAR part 6.2 - Full and Open Competition After Exclusion of Sources – this Requirement has been 100% Set-Aside for Small Business Concerns. 2. The purpose of the Request for Proposal (RFP) is to procure construction services to Inspection and Testing of Electric and Diesel Fire Pumps, Engines, Controllers, and Oil/Water Separator at Building R38, in support of Naval Weapons Station (NWS) Earle. Services are to be performed at Colts Neck, New Jersey. 3. Special clauses and requirements, including wages, work hours, safety and security regulations, etc. for this specific site/location of the work shall be defined herein and be repeated in any resultant contract. 4. Bonding Requirements: None 5. The mandatory Period of Performance: The contractor shall begin performance within 15 calendar days and complete it within 60 calendar days from date of issuance of Notice to Proceed. 6. Bid shall be valid no less than 60 days after offers are due. 7. The NAICS for this solicitation is: 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. 8. One (1) Site Visit is scheduled for Wednesday, 9 September 2026 at 1030 EST. Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, September 9th at 1030 EST hours sharp. Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: 801 Highway 36-N, Leonardo, NJ, 07737. All interested Contractors must send a list of attendees NLT 1000 EST, Tuesday, September 8th so that adequate transportation can be arranged to: Engineering Tech., Azeb Hailu ([email protected]) Additional information for this solicitation can be found WITHIN the solicitation documents. Offerors are instructed to review all available information. Information regarding Site Visit, Requests for Information, Proposal Submission requirements, Basis of Award, Bonding Requirements, ETC are located within the solicitation SF 1449 document.

UPDATE AS OF 10/05/2026: 1. An additional Site Visit has been scheduled for Wednesday, 07 October 2026 at 1030 EST. • Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, 07 October at 1030 EST hours sharp. • Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: • GPS: 801 Highway 36-N, Leonardo, NJ, 07737. • All interested Contractors must send a list of attendees NLT 0800 EST, Wednesday, 07 October so that adequate transportation can be arranged to: • Engineering Tech., Azeb Hailu ([email protected]) 2. The Proposal Due Date will be extended from 14 October to 16 October 2026 NLT 1100 EST. An amendment has been uploaded reflecting the date change. 3. All RFI's are to be sent exclusively to the contracting personnel listed within the solicitation documents ([email protected]). UPDATE AS OF 09/30/2026: 1. An additional Site Visit has been scheduled for Friday, 02 October 2026 at 1030 EST. • Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Friday, 02 October at 1030 EST hours sharp. • Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: • GPS: 801 Highway 36-N, Leonardo, NJ, 07737. • All interested Contractors must send a list of attendees NLT 0800 EST, Friday, 02 October so that adequate transportation can be arranged to: • Engineering Tech., Azeb Hailu ([email protected]) 2. The Proposal Due Date remains unchanged at 14 October 2026 NLT 1100 EST. An amendment will not be issued for this Site Visit notice. UPDATE AS OF 09/28/2026: • Amendment 0001 has been released and uploaded to this SAM.gov notice, officially reflecting the proposal due date change to 14 October 2026. UPDATE AS OF 09/24/2026: • RFI Responses have been uploaded as of 9/24/26. Several attachments referenced in the RFI Response have also been uploaded. • A 2nd Site Visit has been scheduled for 09/29/2026 @ 10:30AM EST. See RFI Response document for Site Visit Instructions. • Proposal Due Date will be extended from 10/7/2026 to 10/14/2026. An amendment will be posted reflecting the date change NLT 09/28/2026. SOLICITATION INFORMATION 1. This Request for Proposal (RFP) is being solicited in accordance with the Federal Acquisition Regulations (FAR) Part 19.502-2 Total Small Business Set-Asides and the Partnership Agreement between the Department of Defense and the U.S. Small Business Administration. Competition under the FAR part 6.2 - Full and Open Competition After Exclusion of Sources – this Requirement has been 100% Set-Aside for Small Business Concerns. 2. The purpose of the Request for Proposal (RFP) is to procure construction services to Inspection and Testing of Electric and Diesel Fire Pumps, Engines, Controllers, and Oil/Water Separator at Building R38, in support of Naval Weapons Station (NWS) Earle. Services are to be performed at Colts Neck, New Jersey. 3. Special clauses and requirements, including wages, work hours, safety and security regulations, etc. for this specific site/location of the work shall be defined herein and be repeated in any resultant contract. 4. Bonding Requirements: None 5. The mandatory Period of Performance: The contractor shall begin performance within 15 calendar days and complete it within 60 calendar days from date of issuance of Notice to Proceed. 6. Bid shall be valid no less than 60 days after offers are due. 7. The NAICS for this solicitation is: 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. 8. One (1) Site Visit is scheduled for Wednesday, 9 September 2026 at 1030 EST. Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, September 9th at 1030 EST hours sharp. Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: 801 Highway 36-N, Leonardo, NJ, 07737. All interested Contractors must send a list of attendees NLT 1000 EST, Tuesday, September 8th so that adequate transportation can be arranged to: Engineering Tech., Azeb Hailu ([email protected]) Additional information for this solicitation can be found WITHIN the solicitation documents. Offerors are instructed to review all available information. Information regarding Site Visit, Requests for Information, Proposal Submission requirements, Basis of Award, Bonding Requirements, ETC are located within the solicitation SF 1449 document.

UPDATE AS OF 10/07/2026: • RFI Response #2 and a picture for reference has been uploaded as of 10/07/26. • Proposal Due Date REMAINS 16 October 2026 NLT 1100 EST. • There is no amendment associated with this update. UPDATE AS OF 10/05/2026: 1. An additional Site Visit has been scheduled for Wednesday, 07 October 2026 at 1030 EST. • Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, 07 October at 1030 EST hours sharp. • Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: • GPS: 801 Highway 36-N, Leonardo, NJ, 07737. • All interested Contractors must send a list of attendees NLT 0800 EST, Wednesday, 07 October so that adequate transportation can be arranged to: • Engineering Tech., Azeb Hailu ([email protected]) 2. The Proposal Due Date will be extended from 14 October to 16 October 2026 NLT 1100 EST. An amendment has been uploaded reflecting the date change. 3. All RFI's are to be sent exclusively to the contracting personnel listed within the solicitation documents ([email protected]). UPDATE AS OF 09/30/2026: 1. An additional Site Visit has been scheduled for Friday, 02 October 2026 at 1030 EST. • Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Friday, 02 October at 1030 EST hours sharp. • Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: • GPS: 801 Highway 36-N, Leonardo, NJ, 07737. • All interested Contractors must send a list of attendees NLT 0800 EST, Friday, 02 October so that adequate transportation can be arranged to: • Engineering Tech., Azeb Hailu ([email protected]) 2. The Proposal Due Date remains unchanged at 14 October 2026 NLT 1100 EST. An amendment will not be issued for this Site Visit notice. UPDATE AS OF 09/28/2026: • Amendment 0001 has been released and uploaded to this SAM.gov notice, officially reflecting the proposal due date change to 14 October 2026. UPDATE AS OF 09/24/2026: • RFI Responses have been uploaded as of 9/24/26. Several attachments referenced in the RFI Response have also been uploaded. • A 2nd Site Visit has been scheduled for 09/29/2026 @ 10:30AM EST. See RFI Response document for Site Visit Instructions. • Proposal Due Date will be extended from 10/7/2026 to 10/14/2026. An amendment will be posted reflecting the date change NLT 09/28/2026. SOLICITATION INFORMATION 1. This Request for Proposal (RFP) is being solicited in accordance with the Federal Acquisition Regulations (FAR) Part 19.502-2 Total Small Business Set-Asides and the Partnership Agreement between the Department of Defense and the U.S. Small Business Administration. Competition under the FAR part 6.2 - Full and Open Competition After Exclusion of Sources – this Requirement has been 100% Set-Aside for Small Business Concerns. 2. The purpose of the Request for Proposal (RFP) is to procure construction services to Inspection and Testing of Electric and Diesel Fire Pumps, Engines, Controllers, and Oil/Water Separator at Building R38, in support of Naval Weapons Station (NWS) Earle. Services are to be performed at Colts Neck, New Jersey. 3. Special clauses and requirements, including wages, work hours, safety and security regulations, etc. for this specific site/location of the work shall be defined herein and be repeated in any resultant contract. 4. Bonding Requirements: None 5. The mandatory Period of Performance: The contractor shall begin performance within 15 calendar days and complete it within 60 calendar days from date of issuance of Notice to Proceed. 6. Bid shall be valid no less than 60 days after offers are due. 7. The NAICS for this solicitation is: 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. 8. One (1) Site Visit is scheduled for Wednesday, 9 September 2026 at 1030 EST. Contractor will meet Gov. Representative at the Waterfront Visitor Control Center parking lot on Wednesday, September 9th at 1030 EST hours sharp. Do NOT go directly to the project site. All attendees will be escorted in a van provided by the Government: GPS: 801 Highway 36-N, Leonardo, NJ, 07737. All interested Contractors must send a list of attendees NLT 1000 EST, Tuesday, September 8th so that adequate transportation can be arranged to: Engineering Tech., Azeb Hailu ([email protected]) Additional information for this solicitation can be found WITHIN the solicitation documents. Offerors are instructed to review all available information. Information regarding Site Visit, Requests for Information, Proposal Submission requirements, Basis of Award, Bonding Requirements, ETC are located within the solicitation SF 1449 document.

The Naval Air Warfare Center Aircraft Division Lakehurst, NJ (NAWCAD LKE) intends to solicit, negotiate, and award a firm-fixed price contract on a sole source basis with The Rhinestahl Corporation (Cage: 5QE71) for the procurement of quantity two (2) of the Support Rail Engine Adapter, P/N: 21C14050G03, in support of F/A-18. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1, 10 U.S.C. 3204(a)(1) “Only one responsible source and no other supplies or services will satisfy agency requirements” for this action. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract.

The purpose of amendment 0007 to RFP FA448426R0001 is to extend the Solicitation closing date and incorporate the following: 1) Remove FAR/RFO 52.228-8 and replace it with "CONTRACTOR VEHICLES, LIABILITY, AND RISK ALLOCATION" in Section H- Special Contract Requirement. 2) Incorporate FAR/RFO 52.228-5 Insurance-Work on a Government Installation. 3) Provide a revised copy of the answers to questions posted. Revisions are directly related to Vehicle CLINs 0008, 1008, 2008, 3008, 4008. 4) Incorporate an updated PWS dated 01 Oct 2026 and revised PWS 2.11.1.3 from "Maintain insurance and liability levels as required in FAR Clause 52.228-8 Liability and Insurance-Leased Motor Vehicles." to "Maintain insurance and liability levels as required in FAR 28.306 Insurance under fixed-price contracts and as outlined in the contract." 5) The solicitation closing date is extended to Wednesday, October 14, 2026 at 4:00PM EST. All other terms and conditions of the solicitation remain the same. _______________________________ The purpose of amendment 0006 to RFP FA448426R0001 is to 1) EXTEND the solicitation closing date to Wednesday, OCTOBER 7, 2026 at 4:00PM EST and 2) Correct a typo in Addendum to RFO 52.212-2(F)(3)(a). Reference to (SF1449 Block 3) is hereby corrected to read (SF1449 Block 6). All other term and conditions of the solicitation remain. _________________________________ The purpose of amendment 0005 to RFP FA448426R0001 is to EXTEND the solicitation closing date from 09 SEP 2026 at 4:00PM to Wednesday, SEPTEMBER 23, 2026 at 4:00PM EST. All other term and conditions of the solicitation remain. _________________________________ The purpose of amendment 0004 is to incorporate Provision/ Clause 52.219-27 Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program. The Solicitation closing due date is not extended. All other terms or conditions remain the same. __________________________________ The purpose of amendment 0003 is to post answers to vendor questions received. As a result, the following revisions have been made: 1) Addendum 52.212-2(F)(2)(b) has been revised to include "The government will evaluate the price of any possible extension by dividing the price in the last option period by twelve, multiplying that figure by six, and adding it to the total price of the base and all options." 2) Addendum 52.212-2(F)(3)(a) Recency has been revised to remove "up to three (3)" and read as follows: To be determined recent, performance surveys and performance questionnaires received by the government shall reference projects that have been awarded, completed, or are ongoing within five (5) years from the date of this solicitation. 3) Provisions/Clauses R-DFARS 252.204-7021 and 252.204-7025 have been removed. 4) PWS Sec 6 Att. 4. Notional schedule has been updated. 5) Addendum to 52.212-1(a)(E.) Specific Instructions has been updated; Redaction should include company names. logos, and identifying information. 6) Burlington County SCA WD 15-4191 has been updated to Revision 34 dated 22AU26. 7) Attachment 14 - Fieldcraft_FA448426R00010003_Vendor Questions has been added. The Solicitation closing date is not extended. All other terms and conditions remain the same. ___________________________________ The purpose of amendment 0002 to RFP FA448426R0001 is to EXTEND the solicitation closing date from 24 AUG 2026 at 4:00PM to 09 SEP 2026 at 4:00PM. All other term and conditions of the solicitation remain. ____________________________________ The purpose of amendment 0001 to RFP FA448426R0001 is to correct the SF1449 Estimated Quantities in Section B: Supplies or Services & Prices or Costs. The solicitation closing date is not being extended. Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. ***Note: A duplicate copy of the PWS is hereby uploaded to remove locked properties of the original copy. No changes to the PWS content have been made. *** EXECUTIVE SUMMARY/ GENERAL INSTRUCTIONS This Executive Summary has been prepared as an aid to you, the potential offeror. The Government has made every effort to accurately reflect the requirements and information contained in this solicitation. However, if there are any inconsistencies between the executive summary and the solicitation, the solicitation will govern. 1. The U.S. Air Force 87 Contracting Squadron (CONS), Joint Base MDL, New Jersey, on behalf of the USAF Expeditionary Center (EC) located on JB-MDL, NJ. has a requirement for providing Fieldcraft Training Support Services in accordance with Performance Work Statement (PWS) (Section 1.2, Attachment 0001) dated 01 OCT 2026. Services shall be provided for one (1) 12-month period plus four (4) 12-month option periods from 12 DEC 2026 – 11 DEC 2031. In addition, the government may extend the total length of the contract by no more than (6) months after the end of the last option year, if necessary, and IAW with RFO 52.217-8. 2. The Government intends to award a single Firm Fixed Price (FFP) Requirements Indefinite Delivery Indefinite Quantity (IDIQ) contract to a Service-Disabled Veteran-Owned Small Business (SDVOSB). The acquisition is based upon competition to represent the Best Value IAW RFO 15.101 to the Government. For proposal instructions and submittal information, see RFO 52.212-1, entitled Instructions to Offerors – Commercial Products and Commercial Services. For the basis of award, see RFO 52.212-2, entitled Evaluation – Commercial Products and Commercial Services. 3. The contracting officer has determined there is a high probability of adequate price competition in this acquisition. Upon examination of the initial offers, the contracting officer will review this determination and if, in the contracting officer's opinion, adequate price competition exists no additional data will be requested and certification under RFO 15.403-4 will not be required. However, if at any time during this competition the contracting officer determines that adequate price competition no longer exists; offerors may be required to submit cost data to the extent necessary for the contracting officer to determine the reasonableness and affordability of the price. 4. This is an all-electronic solicitation release. Hard copies are not available. The Government will post all information pertaining to the solicitation and award of this requirement to the Government Point of Entry (GPE), also known as SAM.gov. It is the responsibility of each offeror to review the web page for postings of amendments, updates, or changes to current information. 5. Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. 6. Questions regarding this RFP shall be submitted via email, and subsequent answers will be posted to SAM.gov. If Offerors have questions, they are requested to submit them in writing grouped by solicitation section and make reference to the particular section / subsection number. Questions must be received via email no later than 5 August 2026 at 1600 Eastern Time to both Christina Vargas at [email protected] and [email protected]. The decision whether to respond to questions and requests for clarification made after Q&A suspense date closing shall be at the sole discretion of the Contracting Officer. Failure of a prospective offeror to submit any questions will be construed to mean that the prospective offeror fully understands all requirements of the solicitation. 7. Clarifications: Clarifications, exchanges of information between Government and offerors, will be controlled by the Contracting Officer. The Government intends to award a contract without negotiations with respective offerors. The Government, however, reserves the right to conduct negotiations if deemed in its best interest. 8. Proposals submitted in response to this RFP must be submitted via email to both Christina Vargas at [email protected] and [email protected]. Proposals not sent to both addresses will be considered nonresponsive and will not be evaluated forward. To ensure successful delivery, contractors shall obtain confirmation from the Contracting Officer that their proposal has been received and reviewed. Email submissions can occasionally be misplaced or routed to junk folders, so it is the contractor's responsibility to secure direct confirmation from the Contracting Officer that the government has both received and acknowledged their proposal. Failure to obtain email confirmation of receipt from the Government may result in your offer not being received and, consequently, not being evaluated. Late proposals will be processed in accordance with RFO 52.212- 1(c) “Late submission, modifications, revisions, and withdrawals of offers.” 9. The anticipated PoP is as follows: The government expects the contractor to be able to perform the requirements of this contract on 12 Dec 26. (Optional) Phase-In Period, One (1) Month PoP from 12 Nov 2026 through 11 Dec 2026 is included, if needed, at no cost to the Government. Base Period, Twelve (12) Month PoP from 12 Dec 2026 through 11 Dec 2027. Option Year 1, Twelve (12) Month PoP from 12 Dec 2027 through 11 Dec 2028. Option Year 2, Twelve (12) Month PoP from 12 Dec 2028 through 11 Dec 2029. Option Year 3, Twelve (12) Month PoP from 12 Dec 2029 through 11 Dec 2030. Option Year 4, Twelve (12) Month PoP from 12 Dec 2030 through 11 Dec 2031. 9.1. All options, if exercised, will be exercised in accordance with the terms and conditions of the Requirements IDIQ. Option Clauses incorporated in the solicitation are as follows: RFO 52.217-5, Evaluation of Options (CD 2026-O0027 18 December 2025) RFO 52.217-8, Option to Extend Services (CD 2026-O0027 18 December 2025) RFO 52.217-9, Option to Extend the Term of the Contract (CD 2026-O0027 18 December 2025) 9. A Contracting Officers Representative (COR) will monitor Contractor’s performance in accordance with Solicitation Attachment 0004, Quality Assurance Surveillance Plan (QASP) 10. Not Separately Priced (NSP): Contractor Manpower Reporting is a requirement under CLIN 0010 and applicable for the entire life of the resultant contract. PRICING SCHEDULE SUMMARY OF PRICES BASE YEAR (12 Dec 26 - 11 Dec 27) $ _________________________ OPTION YEAR ONE (12 Dec 27 - 11 Dec 28) $ _____________________ OPTION YEAR TWO (12 Dec 28 - 11 Dec 29) $ ______________________ OPTION YEAR THREE (12 Dec 29 - 11 Dec 30) $ _____________________ OPTION YEAR FOUR (12 Dec 30 - 11 Dec 31) $ ______________________ GRAND TOTAL (BASE PLUS 4 OPTION YEARS) $_____________________ 11. Representations and Certifications: The provision RFO 52.212-3, Offeror Representations and Certifications - Commercial Items, shall be returned along with the proposal. You must include all Representations and Certifications with your quote or reflect they are completed in SAM.gov. Pursuant to RFO 52.204-7(d), "Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation." See https://sam.gov for information on registration. Identify and include the company's CAGE Code, UEI Number, and business-size standard under the applicable NAICS of 611699. 12. Joint Ventures: If the offeror is a joint venture, the offeror shall provide all required solicitation information for all parties including a copy of the joint venture agreement with proposal. The agreement shall include information which identifies the responsibilities for each entity under this contract. The agreement shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind each entity of the joint venture. Either party to the joint venture may submit performance information on behalf of the joint venture. Joint venture performance will be evaluated and rated based on either party’s performance. The SBA must receive Joint Venture Agreements prior to proposal due date and approved before award of a resulting contract. If a joint venture is contemplated, then the assigned SBA Business Opportunity Specialist (BOS) must be advised as soon as possible. Ensure the agreement is submitted to the BOS in sufficient time to permit a regulatory compliance review. Any corrections and/or changes requested must allow for review time by the BOS before the RFP due date. No corrections and/or changes are permitted after the time for submission of offers. 14. Teaming/Partnering Offerors: If the offer is based on a teaming/partnering relationship, the offeror shall provide all required solicitation information for all parties including a copy of the teaming/partnership agreement. The agreement shall include information which identifies the responsibilities for each entity under this contract. The agreement shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind each entity of the teaming/partnering relationship. 16. In compliance with RFO 4.309(a), the Government will retain one (1) copy of all unsuccessful proposals and will destroy all extra copies. No destruction certificate will be provided. 17. THE FOLLOWING FEDERAL LEGAL HOLIDAYS ARE OBSERVED BY THIS BASE: -New Year’s Day 1st of January -Martin Luther King’s Birthday Third Monday in January -Presidents Day Third Monday in February -Memorial Day Last Monday in May -Juneteenth 19th of June -Independence Day 4th of July -Labor Day First Monday in September -Columbus Day Second Monday in October -Veterans Day 11th of November -Thanksgiving Day Fourth Thursday in November -Christmas Day 25th of December NOTE: Please note observation dates are subject to change depending on whether the holiday falls on a weekend (i.e. holiday that falls on a Sunday, thus may be observed the following Monday). NOTE 1: COMPLETE UNIT PRICES AND TOTAL AMOUNTS. TOTAL MUST BE WITHIN TWO DIGITS OF THE DECIMAL POINT. NOTE 2: IN CASE OF VARIATION BETWEEN THE UNIT PRICE AND EXTENSION, UNIT PRICE WILL BE CONSIDERED THE OFFER. NOTE 3: FAILURE TO PROVIDE PRICING ON ALL CLINS WILL BE CONSIDERED A NON-CONFORMING PROPOSAL AND WILL PRECLUDE THE PROPOSAL FROM ANY FURTHER AWARD CONSIDERATION. NOTE 4: CLAUSES AND PROVISIONS IN THIS DOCUMENT WILL BE NUMBERED IN SEQUENCE, BUT WILL NOT NECESSARILY APPEAR IN CONSECUTIVE ORDER. NOTE 5: INSTRUCTIONS TO OFFERORS FOR COMMERCIAL ACQUISITIONS, OFFEROR REPRESENTATIONS AND CERTIFICATION - COMMERCIAL ITEMS AND PROPOSAL PREPARATION INSTRUCTIONS WILL BE PHYSICALLY REMOVED FROM ANY RESULTANT AWARD BUT WILL BE DEEMED TO BE INCORPORATED BY REFERENCE IN THE AWARD.

***Note: A duplicate copy of the PWS dated 01 OCT 2026 is hereby uploaded to remove locked properties of the original copy. No changes to the PWS dated 01 OCT 2026 content have been made. *** ***As a steward of fair competition, the incumbent has provided additional clarifying information to vendor questions posted regarding vehicle incidents, rollovers, recoveries, or significant damage during high-threat driving instruction under the incumbent contract. The Government hereby agreed to provide offerors such clarification to promote fair competition *** The purpose of amendment 0007 to RFP FA448426R0001 is to extend the Solicitation closing date and incorporate the following: 1) Remove FAR/RFO 52.228-8 and replace it with "CONTRACTOR VEHICLES, LIABILITY, AND RISK ALLOCATION" in Section H- Special Contract Requirement. 2) Incorporate FAR/RFO 52.228-5 Insurance-Work on a Government Installation. 3) Provide a revised copy of the answers to questions posted. Revisions are directly related to Vehicle CLINs 0008, 1008, 2008, 3008, 4008. 4) Incorporate an updated PWS dated 01 Oct 2026 and revised PWS 2.11.1.3 from "Maintain insurance and liability levels as required in FAR Clause 52.228-8 Liability and Insurance-Leased Motor Vehicles." to "Maintain insurance and liability levels as required in FAR 28.306 Insurance under fixed-price contracts and as outlined in the contract." 5) The solicitation closing date is extended to Wednesday, October 14, 2026 at 4:00PM EST. All other terms and conditions of the solicitation remain the same. _______________________________ The purpose of amendment 0006 to RFP FA448426R0001 is to 1) EXTEND the solicitation closing date to Wednesday, OCTOBER 7, 2026 at 4:00PM EST and 2) Correct a typo in Addendum to RFO 52.212-2(F)(3)(a). Reference to (SF1449 Block 3) is hereby corrected to read (SF1449 Block 6). All other term and conditions of the solicitation remain. _________________________________ The purpose of amendment 0005 to RFP FA448426R0001 is to EXTEND the solicitation closing date from 09 SEP 2026 at 4:00PM to Wednesday, SEPTEMBER 23, 2026 at 4:00PM EST. All other term and conditions of the solicitation remain. _________________________________ The purpose of amendment 0004 is to incorporate Provision/ Clause 52.219-27 Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program. The Solicitation closing due date is not extended. All other terms or conditions remain the same. __________________________________ The purpose of amendment 0003 is to post answers to vendor questions received. As a result, the following revisions have been made: 1) Addendum 52.212-2(F)(2)(b) has been revised to include "The government will evaluate the price of any possible extension by dividing the price in the last option period by twelve, multiplying that figure by six, and adding it to the total price of the base and all options." 2) Addendum 52.212-2(F)(3)(a) Recency has been revised to remove "up to three (3)" and read as follows: To be determined recent, performance surveys and performance questionnaires received by the government shall reference projects that have been awarded, completed, or are ongoing within five (5) years from the date of this solicitation. 3) Provisions/Clauses R-DFARS 252.204-7021 and 252.204-7025 have been removed. 4) PWS Sec 6 Att. 4. Notional schedule has been updated. 5) Addendum to 52.212-1(a)(E.) Specific Instructions has been updated; Redaction should include company names. logos, and identifying information. 6) Burlington County SCA WD 15-4191 has been updated to Revision 34 dated 22AU26. 7) Attachment 14 - Fieldcraft_FA448426R00010003_Vendor Questions has been added. The Solicitation closing date is not extended. All other terms and conditions remain the same. ___________________________________ The purpose of amendment 0002 to RFP FA448426R0001 is to EXTEND the solicitation closing date from 24 AUG 2026 at 4:00PM to 09 SEP 2026 at 4:00PM. All other term and conditions of the solicitation remain. ____________________________________ The purpose of amendment 0001 to RFP FA448426R0001 is to correct the SF1449 Estimated Quantities in Section B: Supplies or Services & Prices or Costs. The solicitation closing date is not being extended. Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. ***Note: A duplicate copy of the PWS is hereby uploaded to remove locked properties of the original copy. No changes to the PWS content have been made. *** EXECUTIVE SUMMARY/ GENERAL INSTRUCTIONS This Executive Summary has been prepared as an aid to you, the potential offeror. The Government has made every effort to accurately reflect the requirements and information contained in this solicitation. However, if there are any inconsistencies between the executive summary and the solicitation, the solicitation will govern. 1. The U.S. Air Force 87 Contracting Squadron (CONS), Joint Base MDL, New Jersey, on behalf of the USAF Expeditionary Center (EC) located on JB-MDL, NJ. has a requirement for providing Fieldcraft Training Support Services in accordance with Performance Work Statement (PWS) (Section 1.2, Attachment 0001) dated 01 OCT 2026. Services shall be provided for one (1) 12-month period plus four (4) 12-month option periods from 12 DEC 2026 – 11 DEC 2031. In addition, the government may extend the total length of the contract by no more than (6) months after the end of the last option year, if necessary, and IAW with RFO 52.217-8. 2. The Government intends to award a single Firm Fixed Price (FFP) Requirements Indefinite Delivery Indefinite Quantity (IDIQ) contract to a Service-Disabled Veteran-Owned Small Business (SDVOSB). The acquisition is based upon competition to represent the Best Value IAW RFO 15.101 to the Government. For proposal instructions and submittal information, see RFO 52.212-1, entitled Instructions to Offerors – Commercial Products and Commercial Services. For the basis of award, see RFO 52.212-2, entitled Evaluation – Commercial Products and Commercial Services. 3. The contracting officer has determined there is a high probability of adequate price competition in this acquisition. Upon examination of the initial offers, the contracting officer will review this determination and if, in the contracting officer's opinion, adequate price competition exists no additional data will be requested and certification under RFO 15.403-4 will not be required. However, if at any time during this competition the contracting officer determines that adequate price competition no longer exists; offerors may be required to submit cost data to the extent necessary for the contracting officer to determine the reasonableness and affordability of the price. 4. This is an all-electronic solicitation release. Hard copies are not available. The Government will post all information pertaining to the solicitation and award of this requirement to the Government Point of Entry (GPE), also known as SAM.gov. It is the responsibility of each offeror to review the web page for postings of amendments, updates, or changes to current information. 5. Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. 6. Questions regarding this RFP shall be submitted via email, and subsequent answers will be posted to SAM.gov. If Offerors have questions, they are requested to submit them in writing grouped by solicitation section and make reference to the particular section / subsection number. Questions must be received via email no later than 5 August 2026 at 1600 Eastern Time to both Christina Vargas at [email protected] and [email protected]. The decision whether to respond to questions and requests for clarification made after Q&A suspense date closing shall be at the sole discretion of the Contracting Officer. Failure of a prospective offeror to submit any questions will be construed to mean that the prospective offeror fully understands all requirements of the solicitation. 7. Clarifications: Clarifications, exchanges of information between Government and offerors, will be controlled by the Contracting Officer. The Government intends to award a contract without negotiations with respective offerors. The Government, however, reserves the right to conduct negotiations if deemed in its best interest. 8. Proposals submitted in response to this RFP must be submitted via email to both Christina Vargas at [email protected] and [email protected]. Proposals not sent to both addresses will be considered nonresponsive and will not be evaluated forward. To ensure successful delivery, contractors shall obtain confirmation from the Contracting Officer that their proposal has been received and reviewed. Email submissions can occasionally be misplaced or routed to junk folders, so it is the contractor's responsibility to secure direct confirmation from the Contracting Officer that the government has both received and acknowledged their proposal. Failure to obtain email confirmation of receipt from the Government may result in your offer not being received and, consequently, not being evaluated. Late proposals will be processed in accordance with RFO 52.212- 1(c) “Late submission, modifications, revisions, and withdrawals of offers.” 9. The anticipated PoP is as follows: The government expects the contractor to be able to perform the requirements of this contract on 12 Dec 26. (Optional) Phase-In Period, One (1) Month PoP from 12 Nov 2026 through 11 Dec 2026 is included, if needed, at no cost to the Government. Base Period, Twelve (12) Month PoP from 12 Dec 2026 through 11 Dec 2027. Option Year 1, Twelve (12) Month PoP from 12 Dec 2027 through 11 Dec 2028. Option Year 2, Twelve (12) Month PoP from 12 Dec 2028 through 11 Dec 2029. Option Year 3, Twelve (12) Month PoP from 12 Dec 2029 through 11 Dec 2030. Option Year 4, Twelve (12) Month PoP from 12 Dec 2030 through 11 Dec 2031. 9.1. All options, if exercised, will be exercised in accordance with the terms and conditions of the Requirements IDIQ. Option Clauses incorporated in the solicitation are as follows: RFO 52.217-5, Evaluation of Options (CD 2026-O0027 18 December 2025) RFO 52.217-8, Option to Extend Services (CD 2026-O0027 18 December 2025) RFO 52.217-9, Option to Extend the Term of the Contract (CD 2026-O0027 18 December 2025) 9. A Contracting Officers Representative (COR) will monitor Contractor’s performance in accordance with Solicitation Attachment 0004, Quality Assurance Surveillance Plan (QASP) 10. Not Separately Priced (NSP): Contractor Manpower Reporting is a requirement under CLIN 0010 and applicable for the entire life of the resultant contract. PRICING SCHEDULE SUMMARY OF PRICES BASE YEAR (12 Dec 26 - 11 Dec 27) $ _________________________ OPTION YEAR ONE (12 Dec 27 - 11 Dec 28) $ _____________________ OPTION YEAR TWO (12 Dec 28 - 11 Dec 29) $ ______________________ OPTION YEAR THREE (12 Dec 29 - 11 Dec 30) $ _____________________ OPTION YEAR FOUR (12 Dec 30 - 11 Dec 31) $ ______________________ GRAND TOTAL (BASE PLUS 4 OPTION YEARS) $_____________________ 11. Representations and Certifications: The provision RFO 52.212-3, Offeror Representations and Certifications - Commercial Items, shall be returned along with the proposal. You must include all Representations and Certifications with your quote or reflect they are completed in SAM.gov. Pursuant to RFO 52.204-7(d), "Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation." See https://sam.gov for information on registration. Identify and include the company's CAGE Code, UEI Number, and business-size standard under the applicable NAICS of 611699. 12. Joint Ventures: If the offeror is a joint venture, the offeror shall provide all required solicitation information for all parties including a copy of the joint venture agreement with proposal. The agreement shall include information which identifies the responsibilities for each entity under this contract. The agreement shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind each entity of the joint venture. Either party to the joint venture may submit performance information on behalf of the joint venture. Joint venture performance will be evaluated and rated based on either party’s performance. The SBA must receive Joint Venture Agreements prior to proposal due date and approved before award of a resulting contract. If a joint venture is contemplated, then the assigned SBA Business Opportunity Specialist (BOS) must be advised as soon as possible. Ensure the agreement is submitted to the BOS in sufficient time to permit a regulatory compliance review. Any corrections and/or changes requested must allow for review time by the BOS before the RFP due date. No corrections and/or changes are permitted after the time for submission of offers. 14. Teaming/Partnering Offerors: If the offer is based on a teaming/partnering relationship, the offeror shall provide all required solicitation information for all parties including a copy of the teaming/partnership agreement. The agreement shall include information which identifies the responsibilities for each entity under this contract. The agreement shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind each entity of the teaming/partnering relationship. 16. In compliance with RFO 4.309(a), the Government will retain one (1) copy of all unsuccessful proposals and will destroy all extra copies. No destruction certificate will be provided. 17. THE FOLLOWING FEDERAL LEGAL HOLIDAYS ARE OBSERVED BY THIS BASE: -New Year’s Day 1st of January -Martin Luther King’s Birthday Third Monday in January -Presidents Day Third Monday in February -Memorial Day Last Monday in May -Juneteenth 19th of June -Independence Day 4th of July -Labor Day First Monday in September -Columbus Day Second Monday in October -Veterans Day 11th of November -Thanksgiving Day Fourth Thursday in November -Christmas Day 25th of December NOTE: Please note observation dates are subject to change depending on whether the holiday falls on a weekend (i.e. holiday that falls on a Sunday, thus may be observed the following Monday). NOTE 1: COMPLETE UNIT PRICES AND TOTAL AMOUNTS. TOTAL MUST BE WITHIN TWO DIGITS OF THE DECIMAL POINT. NOTE 2: IN CASE OF VARIATION BETWEEN THE UNIT PRICE AND EXTENSION, UNIT PRICE WILL BE CONSIDERED THE OFFER. NOTE 3: FAILURE TO PROVIDE PRICING ON ALL CLINS WILL BE CONSIDERED A NON-CONFORMING PROPOSAL AND WILL PRECLUDE THE PROPOSAL FROM ANY FURTHER AWARD CONSIDERATION. NOTE 4: CLAUSES AND PROVISIONS IN THIS DOCUMENT WILL BE NUMBERED IN SEQUENCE, BUT WILL NOT NECESSARILY APPEAR IN CONSECUTIVE ORDER. NOTE 5: INSTRUCTIONS TO OFFERORS FOR COMMERCIAL ACQUISITIONS, OFFEROR REPRESENTATIONS AND CERTIFICATION - COMMERCIAL ITEMS AND PROPOSAL PREPARATION INSTRUCTIONS WILL BE PHYSICALLY REMOVED FROM ANY RESULTANT AWARD BUT WILL BE DEEMED TO BE INCORPORATED BY REFERENCE IN THE AWARD.

Amendment to a Previous Combined Solicitation Page 1 of Amendment to a Previous Combined Solicitation Page 3 of 3 Amendment to a Previous Combined Solicitation *= Required Field Amendment to a Previous Combined Solicitation Page 1 of 3 The purpose of this amendment is to extend the deadline for submission of proposals. The solicitation is extended as the VA is preparing the responses for a large number of Requests for Information (RFI). The new submission date is 1:00 PM Thursday, October 15, 2026.

10/07/2026 - Solicitation Amendment 0001 - Please see additional information and see additional attached documents. This solicitation is established to fulfill the requirement for No. 6 Boiler Feed Pump Replacement at the Lyons VA Medical Center in Lyons, NJ. Please refer to the attached solicitation for the detailed Statement of Work and instructions to offerors. There will be no site visit scheduled. Any questions regarding this solicitation must be submitted to [email protected] no later than October 6, 2026, at 3:00pm EST. An amendment with any questions and answers will be posted on SAM.gov no later than October 7, 2026, by COB. The offer submission due date and time is October 15, 2026, 3:00 PM EST. Official quotes must be submitted electronically to [email protected].

This is a Sources Sought Notice for market research purposes only. This is not a solicitation for proposals/bids, and no contract will be awarded from this notice. The U.S. Army Corps of Engineers (USACE), Philadelphia District (NAP), is conducting market research to identify qualified and interested businesses capable of performing the Design-Build (DB) project described below. No reimbursement will be made for any costs associated with providing information or industry response to this notice or any follow-up information requests. Not responding to this notice does not preclude participation in any future procurement. If a solicitation is released, it will be synopsized in the System for Award Management (SAM). It is the responsibility of potential offerors to monitor SAM for additional information pertaining to this requirement. The acquisition strategy will be determined based on responses received from this notice and/or other market research methods. The planned acquisition strategy will be posted in SAM upon completion of market research analysis. The purpose of this notice is to gain knowledge of interest, capabilities and qualifications of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUBZone), Service-Disabled Veteran-Owned Small Business (SDVOSB), or Women-Owned Small Business (WOSB). All are highly encouraged to respond. Prior Government contract work is not required for submitting a response to this notice. However, respondents are reminded that all construction performance must follow the Engineer Manual (EM) 385-1-1, USACE Safety and Health Requirements Manual and any other requirements contained in the solicitation, and must also comply with all Federal, State and local laws, ordinances, codes and/or regulations. This announcement provides the detailed information necessary for your firm to prepare its response. **************************************************************************** Project Title: Detection Sciences Testing and Applied Research Project Project Location: Transportation Security Laboratory located at the Federal Aviation Administration (FAA), W. J. Hughes Technical Center (WJHTC) , Egg Harbor Township, NJ NAICS Code: 236220, Commercial and Institutional Building Construction PSC: Y1DB, Construction of Laboratories and Clinics Estimated Magnitude of Construction: Between $25,000,000 and $75,000,000 Anticipated Solicitation Issuance Date: April 2027 Estimated duration of the project: 1,095 Calendar Days Anticipated Contract Type: Firm-Fixed Price (FFP), Design-Build (DB) Contract Anticipated Acquisition Method: RFO 36.101-2 Two-Phase Design Build Selection Procedures and RFO Part 15 Negotiated Procurement using “Best Value” tradeoff process High Level Project Summary: The Transportation Security Laboratory (TSL) is a federal laboratory aligned under the Science and Technology Directorate of the Department of Homeland Security (DHS). The Transportation Security Laboratory (TSL) campus is located along the eastern boundary of the William F. Hughes FAA Technical Center at the Atlantic City International Airport. TSL is responsible for researching, developing, engineering, testing and evaluating solutions to detect and mitigate the threat of Improvised Explosive Devices and weapons used against our Nation’s transportation systems. The project entails construction of a Detection Sciences, Testing and Applied Research Center (DSTARC) and the associated Facility for Energetic Materials Research (FEMR) building, including supporting infrastructure (hereafter referred to as the “DSTAR Project”). The project entails the construction of an approx. 40,000 SF Detection Sciences Testing and Applied Research Center (DSTARC) laboratory, an approximately 6,000 SF Facility for Energetic Materials Research (FEMR) laboratory, and ancillary site improvements to support these buildings. The combined buildings will enable TSL to perform trace material characterization and develop testing methods and protocols to detect and mitigate the threat of improvised explosive devices. The multi-story DSTARC will be composed of pile foundations, steel framing and brick veneer, painted metal panel exterior with standing seam metal roofing. Interior construction will consist of reinforced concrete masonry walls, metal stud, gypsum board walls and operable / movable partition walls Detection Sciences Testing and Applied Research Center laboratory building will include modern office space, conference rooms, laboratory areas, chemical and hazardous waste storage aeras, sensitive compartmented information facility areas, blast hardened features, loading dock, etc. Classified work areas shall be designed in accordance with DHS requirements. Specific laboratories within the DSTAR complex shall be blast hardened to withstand small quantity material detonations of up to 5 grams. The approximate 6,000 SF Facility for Energetic Materials Research laboratory will include laboratories, office space, and a control room dedicated to energetic materials synthesis and full-scale safety testing of these materials. The Energetic Material Synthesis Laboratory shall be capable of withstanding the detonation of up to two kilograms of explosives without damage to other laboratories or buildings, or serious injury to personnel outside of the Energetic Material Synthesis Laboratory. Other laboratories within the DSTAR complex shall be blast hardened to withstand small quantity material detonations of up to 5 grams. The project also includes related infrastructure such as parking areas, roads, utilities, and site improvements. Roads and parking will integrate with existing infrastructure in a manner that facilities foot and vehicle traffic in and around the TSL campus. Minimum Technical Requirements and Critical Features of Work: The DSTAR buildings shall have the capability to securely and efficiently exchange documents with classifications levels up to Top-Secret/Sensitive Compartmented Information (TS/SCI) documents and data with authorized individuals and organizations in Secret Sensitive Compartmented Information (SCIF) and Top Secret Sensitive Compartmented Information (TS-SCI) Areas. The DSTARC building will become the main IT hub for the TSL campus. All building controls, security and fire systems, mechanical and information technology systems shall be able to fully integrate with existing TSL infrastructure. All fire system installations and modifications shall be in accordance with the Transportation Security Laboratory Campus-Wide Fire Alarm System Planning Considerations white paper written by the FAA WJHTC Project Engineering and Construction Office in January 2010. The Chemistry Complex shall have environmental controls and systems independent of HVAC systems in the rest of the building to prevent or mitigate contamination of these spaces. The HVAC system for the Chemistry Complex shall be able to meet temperature, humidity, and relative pressure requirements and ASHRAE 55 standards while fume hoods are operating. The DSTAR buildings require enhanced commissioning upon completion to validate energy performance. Other Known Challenges: The TSL campus is located within the federally secured FAA William J. Hughes Technical Center. The Contractor shall comply with formal administrative requirements and security compliance obligations prior to entering the TSL Campus. The project is located within the NJ Pinelands reserve. All improvements and environmental permits to comply with the stormwater quality, quantity, and recharge requirements as set forth by NJDEP, Pinelands, SCD, Section 438 of EISA 2007 and the NJDEP Stormwater Management Rules and NJDEP Best Management Practices (BMP) standards. **************************************************************************** Prospective subcontractors are encouraged to submit so the information can be used when developing the potential Small Business Participation Plan percentages if the eventual acquisition is conducted as an unrestricted, negotiated acquisition. If your firm is interested in subcontracting opportunities rather than performing as the Prime Contractor on this future procurement, please identify the feature(s) of work you are interested in and your small business socio-economic category in the Market Survey Form. All submissions must be made as follows, returning a completed Market Survey Form (see Attachment). AUTHORIZED SUBMISSION METHOD: Please return the Market Survey Form via email to Eric Leach at [email protected] and Connor Struckmeyer at [email protected]. Include in the title "Sources Sought - DSTAR" as the subject line in email communications. All responses must be in either Microsoft Word (.docx) or Adobe PDF format. DEADLINE: All responses must be submitted to the POCs noted above no later than 15 October 2026 by 4:00 PM EDT.

Amendment 0002 This amendment adds specification 02 82 13.13 Glovebag Asbestos Abatement to the list of specifications in section B.2, 2.10 A) of this solicitation and answers received vendor questions. Amendment 0001 answers contractor questions. General Information 2.1 Location Work performed under this scope shall be for and conducted within the VA New Jersey Health Care System (VANJHCS) at the East Orange VA Medical Center, located at 385 Tremont Ave, East Orange, NJ 07018, and Lyons VA Medical Center, located at 151 Knollcroft Rd, Lyons NJ 07939. 2.2 Purpose This Statement of Work (SOW) is for an IDC for demolition and abatement efforts supporting construction and repair services at VANJHCS Medical Centers. These services shall be provided on an as needed basis, for a five-year term. VANJHCS has various sized projects that require a Contractor to perform the demolition and abatement portion of this work necessary to accomplish this goal. The minimum value for this IDC is $10,000.00 with a maximum dollar value of $2,000,000.00. 2.3 Scope A description of all individual demolition and abatement tasks covered under this IDC contract can be found in the contract Line Items. The contractor shall provide all labor, materials, equipment, tools, transportation, supervision, safety, quality control and management necessary to fulfill the requirements of task orders issued by the Government under this contract. All work completed under this contract shall comply with applicable Infection Control requirements and the New Jersey Administrative CodeA (NJAC) 5:23-8, Asbestos Hazard Abatement Subcode, and NJAC 12:120 governing asbestos abatement, licensing, and permitting requirements. Additional administrative and management related requirements are described in Section 3: Requirements. Material testing and air monitoring services required while performing asbestos removal services shall be provided by the VANJHCS at no cost to the contractor. No work outside the defined Statement of Work (SOW) shall be performed without written authorization from the Contracting Officer (CO). Unauthorized work may be deemed Unauthorized Commitment (UAC) and may not be reimbursed. The Contractor shall be responsible for all means and methods and shall ensure all work is performed in a safe, compliant, and professional manner.

NOTICE OF INTENT TO SOLE SOURCE The Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst intends to negotiate a sole-source Firm-Fixed-Price contract with CIRCOR Pumps North America LLC (CAGE 59180) for the procurement of twelve (12) Recirculation Pumps, Part Number 3339/102-1, in support of the Electromagnetic Aircraft Launch System (EMALS) on CVN 80. Description of Requirement: Quantity 12 each – Recirculation Pump, P/N 3339/102-1. These pumps are source-controlled and form/fit/function critical components of the EMALS Motor Generator lubricating and cooling system. The drawing is proprietary to CIRCOR Pumps North America LLC. The pumps must be fully interchangeable with units already installed and qualified on prior Ford-class carriers. Statutory Authority: 10 U.S.C. § 3204(a)(1) / FAR 6.302-1 – Only one responsible source and no other supplies or services will satisfy agency requirements. Market Research: Market research has been conducted and indicates that CIRCOR Pumps North America LLC is the only responsible source capable of meeting the Government’s requirements. This notice is not a request for competitive proposals. However, all responsible sources may submit a capability statement that demonstrates the ability to provide an interchangeable product that meets all form, fit, function, and performance requirements of P/N 3339/102-1. Capability statements must be submitted by the response date listed in this notice. The Government will consider any responses received. If no affirmative responses are received that demonstrate the ability to meet the Government’s requirements, a sole-source award will be made to CIRCOR Pumps North America LLC. Response Deadline: October 16, 2026 3:00pm EST. Point of Contact: Josh Panecki Contract Specialist NAWCAD Lakehurst Email: [email protected] Phone: 240-572-6308

The U.S. Army Contracting Command – Rock Island at Picatinny is issuing this combined synopsis/solicitation W15QKN26RA097 as a Request for Quote (RFQ) for Hexagon Coordinate Measurement Machines (CMM) Preventative Hardware, Software Maintenance and Repair Services to the DEVCOM-AC Quality Engineering & Systems Assurance (QE&SA) laboratory in support of U.S. Army Combat Capabilities Development Command (DEVCOM) Armaments Center (AC), Picatinny Arsenal, New Jersey. This RFQ is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Revolutionary Federal Acquisition Regulation Overhaul (RFO) Subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is a 100% sole source to Hexagon Metrology Corporation. This acquisition is a brand name requirement for the U.S. Army Combat Capabilities Development Command Armaments Center (DEVCOM AC) and shall be issued under the authority of 41 United States Code (U.S.C.) 1901 as implemented in RFO 12.201-1, Simplified procedures, which restricts competition to only one source available. The applicable NAICS Code for this procurement is 811210: Electronic and Precision Equipment Repair and Maintenance, with a small business size standard of $34M. The Contractor shall provide preventative and emergency repair service for Hexagon CMMs, to include software upgrades, system calibration, hardware repairs, preventative maintenance, and helpdesk support. The Contractor shall provide a one-year Hexagon MyCare Hardware Preventative Maintenance & Calibration Agreement/Service Subscription, Software Support and Parts Blanket associated with five CMMs and one Portable Coordinate Measuring Machines (PCMMs). Offerors responding to this RFQ shall submit a Firm Fixed Price (FFP) quote for the listed Line Items. This contract will consist of one 12-month base year with four 12-month option years. Offerors must be able to provide all the line items meeting the specifications and requirements provided in the RFQ, and RFQ Provisions & Clauses within the specified delivery time. Please see the attached Combined Synopsis Solicitation for the complete information regarding this requirement.

As of 02 October 2026: Amendment 0001 posted along with Phase one and Phase Two DB Selection Procedure documents. As of 18 September 2026: RTA 30% Package broken up and uploaded due to SAM size limitation. As of 17 September 2026: Phase I of a Two Phase BVTO posted. The Port Monmouth project consists of shore protection components (Phase 1) as well as flood risk management components (Phase II). The project provides for reduction of storm damages to low-lying residential and commercial structures from coastal erosion, tidal flooding, and inland flooding along Pews and Compton Creeks caused by high surface events in Raritan Bay. Phase II flood risk management components consist of a tide gate, levees, floodwalls, two pump stations, three road closure structures, road raising and regarding, and wetland mitigation. The State of New Jersey, acting through the New Jersey Department of Environmental Protection (NJDEP), is the non-Federal sponsor for the project.

Princeton Plasma Physics Laboratory is looking to acquires PPPL personnel perform much of the routine required inspections; however, during peak workload periods and for large repairs, the Subcontractor may be called upon on to perform these tasks. This SOW provides the requirements for subcontracted periodic inspections. It also addresses the assignment to a Subcontractor of the requirement to perform remedial (corrective) maintenance, which may be determined necessary based upon the periodic inspections, in order to make a piece of equipment operable in accordance with governing codes and standards, and the performance of routine maintenance as recommended by the various equipment manufacturers. Unless specified and agreed to otherwise in writing, PPPL requires that the work be performed in accordance with the manufacturer specifications and procedures. After any maintenance is performed, a complete thorough check of equipment function shall be performed including all safety features and interlocks as described by the manufacturer. Additionally, the Subcontractor may be called upon for advice for crane upgrades and performance enhancements. Several large cranes (Items 3, 13, 33, 34 on Attachment A) are retrofitted with Catron/Electromotive radio remote controls and Variable Frequency Drives. Familiarity with and qualification in maintenance and adjustments of these cranes and control systems is mandatory. Subcontractor's membership in the Crane Manufacturers Association of America (CMAA) is regarded as highly desirable, and a measure of the Subcontractor's professionalism and technical qualification for performing tasks such as assigned under the Statement of Work.PPPL does not guarantee any minimum level of work and reserves the right to use other sources to perform the inspection and maintenance tasks when PPPL determines this to be appropriate A mandatory preproposal zoom meeting has been scheduled for 1:30 PM on 8 Oct 2026. Zoom invitations will only be sent to firms completing and submitting an RFP acknowledgement form